PMI Model No. P8T-0R1G20G-110-T-512-SFF
PMI Model P8T-0R1G20G-110-T-512-SFF is a Single Pole, Eight Throw, Solid-State Absorptive Switch which operates over the 100MHz to 20.0GHz frequency range. This model provides 110dB of isolation over the entire frequency range of operation and offers... Read More
PMI Model No. HADA-D2001 is a Detector Log Video Amplifier (DLVA) that operates between the 0.5 to 2.0GHz frequency range. It has a dynamic range of 40dB, a log slope of 50mV/dB and a nominal bandwidth of 20MHz. Furthermore, it has been designed using cutting edge technology which provides... Read More
PMI Model No. HADA-D2002 is a Detector Log Video Amplifier (DLVA) that operates between the frequency range of 2.0 to 18.0GHz. It has a dynamic range of 40dB with a log slope of 50mV/dB and a nominal video bandwidth of 12MHz. This unit has been designed with cutting edge technology which... Read More
Our HALT and HASS Time Compressor® chambers provide extreme temperature & vibration capabilities used during the product design and manufacturing cycles to compress the time normally required to identify design and process weaknesses. HALT techniques are important in uncovering many of the weak... Read More
Many of Empower’s standard modules can be adapted to be installed into an “All environment” rated enclosure. Options that have been integrated into our harsh environment, systems enclosure include:
-Flexible supply voltage (AC or DC)
-T/R Switch or dummy load connection or test RF port... Read More
This reduced-height 1/4-wave antenna is ready for years of use thanks to a flexible internal helical that is overmolded with a heavy-duty protective jacket. It's an excellent choice for outdoor applications or for use in adverse environments where the antenna must resist shock, harsh weather,... Read More
◇ This series are miniaturization coupling with SMA or N connector , which are widely used in electronic countermeasures,communications, test and measurement ultra-wideband system for signal sampling, monitoring and power distributing or combinging .
◇ Large frequency... Read More
Master Bond Polymer System EP21TCHT-1 is a two component, thermally conductive, heat resistant epoxy compound formulated to cure at ambient temperatures or more rapidly at elevated temperatures. It passes NASA low outgassing certification.
Product advantages include:
- Convenient mixing:... Read More
In its vertically integrated USA facility, Johanson utilizes alumina (AL2O3), aluminum nitride (AlN), beryllium oxide (BeO), Kovar and other materials to produce HTCC multilayer and single layer hermetic & non-hermetic packages in a wide variety of configurations for the photonic, semiconductor... Read More
Spectrum Devices is your source for low frequency high power devices. From legacy products to new designs, our 12 volt products offer drop-in equivalence to other manufacturers.
Spectrum's innovative designs allow higher performance than traditional RF bipolar products. With higher breakdown... Read More
Spectrum Devices is your source for low frequency high power devices. From legacy products to new designs, our 28 volt products offer drop-in equivalence to other manufacturers.
Spectrum's innovative designs allow higher performance than traditional RF bipolar products. With higher breakdown... Read More
Spectrum Devices' line-up of high power RF transistors are designed for use in communications and power generation. With improved breakdown voltage characteristics, our bipolar products have improved performance and ruggedness over the competition. With our Standard Cell™ technology, Spectrum... Read More
HFS-1540 / HFS-2150:
Dual Channel Telemetry System Utilizes Tandem Frequency Synthesizers
The HFS-1540 and HFS-2150 frequency synthesizers from EM Research are designed for dual-channel telemetry receivers utilizing auto-tracking antenna systems. The HFS-1540 operates from 1435 to 1540... Read More
The ICM High Power Transistor Test Fixture has been designed to test many different package sizes quickly and economically.
Individual components can be interchanged to accommodate specific test applications. Launch sections can be 50 ohm, or can have pre-matching circuitry.
This fixture... Read More
NIC introduces its Miniature size Cavity Filter products designed for use in airborne, ship mount or vehicle mount applications in harsh military environments. They can be
custom designed for any center frequencies varying from 3 GHz to 18 GHz, and 3 dB bandwidth from 5 to 30%. Read More
The choice of spring probe will determine the maximum frequency that a socket can operate. This is usually marked as the pin bandwidth where the insertion loss on the pin reaches -1dB.
Our pin designs are each characterized on a VNA for frequency bandwidth limits. We also simulate our pins... Read More
BroadWave Technologies announced the development of a new series of high isolation 5-Watt average power divider / combiners for antenna sharing, telecommunication infrastructure and test system applications. Model series 152-085-XXX* are 50 Ohm units available in 2, 3 and 4-Way configurations... Read More
Skyworks offers a family of high isolation (47 dB) multi-throw switches for 0.7–3.0 GHz Rx switching. The SKY13522-644LF, SKY13523-639LF and SKY13524-639LF are designed for switching single-ended Rx SAW filters in cellular handsets. Consuming less than 10 µA of current, they are ideal for low... Read More
The WIO® High Level Switches are specifically designed for industrial wireless liquid level sensing for spill/overflow prevention. These submersible level switches are ideal for point level sensing of refined fuels, crude oil products, chemicals, acids, caustics, lubricants, detergents... Read More
The WIO® High Level Switches are specifically designed for industrial liquid level sensing for spill/overflow prevention.
The High Level Switches are self-contained and integrated with a battery-powered RF transmitter which immediately transmits wireless alarms when a set point level is... Read More
Designed for applications where high performance noise attenuation is required. Applications include EMC compliance of switching power supplies, motors and fans, solid-state relays and other equipment requiring superior attenuation across the conducted RF band.
- Compact case... Read More
Kete Microwave supply a complete line of 50 Ohms coaxial high power attenuators.These RF attenuators are designed and manufactured with high quality materials to guarantee good and stable performance. The resistive components are available RoHS Compliant.RF attenuators are widely used in... Read More
Devens, MA - Response Microwave, Inc. a specialist in providing innovative customer solutions, is pleased to announce the availability of its new application specific 10Db directional coupler for use in high-power telecom distribution applications.
The new unit operates between 800 to... Read More
Devens, MA - Response Microwave, Inc. a specialist in providing innovative customer solutions, is pleased to announce the availability of its new application specific 3dB, 90º quadrature hybrid for use in high-power telecom
The new unit operates between 800 to... Read More
Model LM-2G8G-13-5W-SFF is a high power limiter that operates from 2.0GHz to 8.0GHz. This limiter handles 5 Watts CW input power while the insertion loss is only 1.0dB typically and has a VSWR of 2.0:1 maximum. This model offers an ultra-fast recovery time of 40nsec maximum and is supplied in a... Read More
Johanson High Power Resistive Products combine over 60 years of precision metal fabrication, ceramic processing, and assembly with proven design. Johanson offers complete design to manufacturing capabilities to provide standard and custom solutions to meet your needs. Read More
We offer a range of flange high power resistors. The devices have standard resistance value of 100Ω, other resistance values are available with 4 Ω-1000Ω. The power rating is available from 2W to 800W. These flange resistors are designed and manufactured with high quality materials to guarantee... Read More
Kete Microwave supply a complete line of coaxial and 50 ohms high power terminations. These RF terminations are designed and manufactured with high quality materials to guarantee good and stable performance. The resistive components are available RoHS Compliant. High power terminations are used... Read More
PMI Model P2T-335M535M-30-R-SFF-20W is a Single Pole, Two Throw, Solid-State Switch that operates over
the 335 to 535MHz frequency range. Other designs up to 18GHz are available. This model provides over
40dB of isolation and has a ultra low insertion loss of 1.0dB maximum. This model is... Read More
KEC70B Series Key Specifications/Special Features:
◇ Low ESR/ESL, High Self-Resonance
◇ Low Noise, Ultra-Stable Performance
◇ High Q, High Power
◇ Capacitance Range: 0.5-5100pF
◇ TCC: 0±30ppm/℃
◇ RoHS Compliant
Common Band and Broadband
Frequency Range (GHz) from 1.7 - 2.40 to 17.2 - 18.2
Isolation (dB) 40 to 60
Ins. Loss (dB) .60 to .75
Connector Types: N, SMA
Sizes from 1-1/2 x 7/8 x 5/8 to 4 x 2-1/8 x 1
- Female connectors are standard
- Other combinations are available on special... Read More
Focus manufactures single probe high VSWR tuners (option –HR) for frequencies in the 0.8 to 6 GHz range. Single probe tuners are smaller, lighter and less expensive than dual probe prematching tuners (PMT). The obtainable VSWR is not as high as with PMT’s (60:1-70:1 versus 150:1) but, for many... Read More
Through its Isolink subsidiary, Skyworks introduces a low-loss, high performance wideband DC to 6 GHz hermetic GaAs IC single-pole, single-throw (SPST) non-reflective switch. The ISO13316 is ideal for high reliability space, satellite, and defense applications. The device performs with 45 dB... Read More
Through its Isolink subsidiary, Skyworks introduces a low-loss, high performance wideband DC to 8 GHz hermetic GaAs IC single-pole, double-throw (SPDT) absorptive switch. The ISO13286 is ideal for high reliability space, satellite, and defense applications. The device performs with 50 dB... Read More
AEM manufactures hi-rel fuses for vacuum environments such as space. Our FM12A series is a NASA QPL fuse and we also have the P600L; P700L; P800L; SK406; SM1206 & other customer fuse types for aerospace applications. Read More
Can either aggregate data at a max rate of up to 14Gbps or operate as independent data channels. Ideal for Video Over Fiber and other applications that require transmission of multiple high speed channels on a single fiber.
Four or Six isolated channels on one multi-mode fiber
Designed to... Read More
GaGe high-performance PCIe digitizers are renowned for sustaining the maximum effective number of bits (ENOB) over a wide signal frequency range with quality signal conditioning and signal fidelity features.
GaGe PCIe digitizers also lead the data acquisition industry for onboard digitizer... Read More
PMI Model No. P2T-18G40G-65-R-292FF
PMI Model P2T-18G40G-65-R-292FF is a Single Pole, Two Throw, Solid-State Switch which operates over the 18GHz to 40.0GHz frequency range. This model provides 55dB of isolation over the entire frequency range of operation and offers low insertion loss... Read More
PMI Model No. P4T-0R1G20G-100-T-SFF
PMI Model P4T-0R1G20G-100-T-SFF is a Single Pole, Four Throw, Solid-State Absorptive Switch which operates over the 100MHz to 20.0GHz frequency range. This model provides 110dB of isolation over the entire frequency range of operation and offers low... Read More
The Model 520 Series are low noise power supplies designed for photodetector biasing applications. Output voltages up to 800V are available in two polarities. The compact size and shielded metal case make the Model 520 Series attractive for a variety of low noise biasing applications. The... Read More
Rugged and Reliable. AMI offers a broad line of compact, high voltage capacitor charging power supplies designed for use from a DC source. Available with a variety of output power levels, these modules are ideal for OEM applications. Based on a proven design topology, these modules have been... Read More
A highly integrated 5 GHz WLAN front-end module for reference designs targeting smartphones and tablets in a 2.5 x 2.5 mm, QFN package. The SKY85702-11 incorporates a power amplifier and a SPDT transmit and receive switch for mobile/portable 802.11ac applications and systems. The... Read More
Lumped Highpass filters are available up to 40GHz with Chebyshev, Butterworth, Bessel, Gaussian, linear phase, elliptical and other transfer functions.
Lumped Element Filters
-Frequency Range: 50 KHz - 40 GHz
-Available Packaging: Connectorized, SMT, Thru-hole, Custom Read More
Signatec has a long history of providing high-speed data recording and playback solutions. This expertise in delivering real-time systems saves customers time, and eliminates uncertainties when buying gap-free recording solutions. By providing turn-key hardware and software bundles, we provide... Read More
- 2.5kW power processing
- Used in very-low phase noise and spurious radar transmitters
- Two or three collector TWTs
- SAR and multimode radars
- Very low ripple
- Excellent regulation
- Highly reliable
- Frequency agile PRF synchronization
- Solid state modulator
-... Read More
NuWaves family of HILNA™ amplifiers are desgined to achieve an unprecedented unique combination of amplifier attributes to include very low noise, high gain, high linearity, and broadband performance.
HILNA™ amplifiers include five standard packages as well as custom solutions for a variety... Read More
Hiperco 50 is an alloy of 49% Cobalt, and 2%Vanadium, balance Iron. This alloy exhibits the highest magnetic saturation of any commercial alloy and excels in applications where this attribute is needed. This alloy has higher mechanical strength than other soft magnetic alloys.
Ed Fagan Inc.... Read More
NuWaves' High Performance Wideband RF Tuner (HiPerTUNER™) provides excellent performance where selective filtering is needed, such as a receiver preselector or exciter postselector, over the frequency range of 200 MHz to 2.5 GHz.
NuWaves' HiPerTUNER™ is a state-of-the-art miniature RF Tuner... Read More
The HLX-10000 from EM Research is the microwave industry’s smallest integrated X-Band fixed-frequency synthesizer operating at 10 GHz with a 50 MHz reference. The unit features good phase noise, (<-80 dBc/Hz @ 10 KHz), with high-vibration tolerance, (0 dB degradation up to 6 G’s RMS). The unit... Read More
Multiple Channel Radio Frequency Module
The HP3 Series is designed for the cost-effective, high-performance wireless transfer of analog or digital data in the popular 902-928MHz band. All HP3 Series parts feature eight parallel selectable channels and models are available which add serial... Read More
◇ This series are miniaturization microstrip power dividers with SMA or N connectors , which are widely used in electronic countermeasures,communications, test and measurement ultra-wideband system for signal distributing or combining, power detection and signal sampling or... Read More
HPQN Connectors, (High Performance Quick-lock N), released by Anoison in 2006, is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original N with a snap-on coupling mechanism, the HPQN series is able to
provide 10x faster mating, increased... Read More
HS Series encoders and decoders are designed to provide maximum security for Remote Keyless Entry (RKE) and remote control applications. The series consists of an encoder that will encode the status of up to 8 buttons or contact closures into a highly-secure encrypted transmission, and a decoder... Read More
HW Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The 315MHz, 418MHz and 433MHz monopole versions have a 1/4-wave element. The 868MHz, 916MHz and 2.4GHz dipole versions have a center-fed 1/2-wave element with an internal ground reference. The... Read More
HWR Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The articulating base allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315MHz, 418MHz and 433MHz versions have a 1/4-wave element. The 868MHz, 916MHz, 1.4GHz and 2.4GHz versions... Read More
High-Performance 1.25Gbps E-Band Radios
Link for Light-licensed deployment
Minimum to Maximum Distance 20 m to 5,200 m
Millimeter Wave Performance
Frequencies covering 59.0 to 76.0 GHz
Check website for which Radio is most appropriate for you needs.
RF Injection Power into... Read More
The HXV Series computer controlled switching systems are used for high voltage and HIPOT applications. They consist of pre-wired mainframes and expansion chassis which hold selected switch modules needed to furnish the required matrix or multiplexer configuration.
•Hot-switches up to 3500... Read More
3 dB, 90° hybrid coupler is a four-port device that is used either to equally split an input signal with a resultant 90° phase shift between output signals or to combine two signals while maintaining high isolation between them.
Now available in 7/16 DIN! MECA’s line of high power 3 dB, 90°... Read More
HYBRIFLEX™ DIRECT-LTE, used with LTE RRHs requiring 2 pairs of fiber per head, cuts installation time in half
RFS introduces HYBRIFLEX™ DIRECT-LTE designed to be used with LTE Remote Radio Heads (RRH) requiring 2 pairs of fiber per head. The cable (Model Number example HB078-1-06S3-M6J) is... Read More
Hydlar ZF is a relatively new plastic. It was first formulated by the scientists at A.L. Hyde Company in 1984. Hydlar ZF is Kevlar fiber reinforced Nylon 6/6. With the addition of Kevlar, Hydlar ZF's properties improve, better dimensional stability is achieved and wear resistance is increased... Read More