Devens, MA - Response Microwave, Inc. a global specialist in providing RF/Microwave customer solutions for the defense and telecommunications market, is pleased to announce the availability
of it’s new family of LMR type cable assemblies .
The new family includes cable diameters from 0.195... Read More
The SemiProbe Lab Assistant family of probe systems is specifically designed to address the requirements of Universities and research personnel - simplicity and ease of operation, portability, affordability and modularity. Read More
The 750 Series Laser Rangefinder Receivers are designed for laser ranging applications in which high sensitivity and fast recovery are required. The hybrid versions are designed to meet MIL-STD-883D requirements. Either a silicon avalanche photodiode (APD) or an InGaAs PIN photodiode or APD is... Read More
The Model 742DP is a new generation of laser spot tracker with wide flexibility for missile and platform tracker applications. The detector is temperature controlled and optimized for 1.06µm. Independent five channel noise detectors set the lowest thresholds to achieve long acquisition ranges... Read More
HCI offers a complete design service including Schematic Capture, Part Library work, Layout, Documentation, Conversions, Reverse Engineering, and Revisions.
A great circuit design deserves a great layout. Our designers pride themselves on making great layouts, error free and on schedule. It... Read More
Centre Frequency Insertion loss: ≤3.0 dB
BW at 3db : ≥180 MHz
VSWR in the passband : ≤1.5 @f0±70 MHz
Rejections relative to Fc:
≥45 dB @ DC to 3421 MHz
≥45dB @ 4043 to 4354 MHz
≥40dB @ from 4354 to 10000 MHz
Operating temperature : -25°C to... Read More
NIC’s miniature LC Filters product line is designed for applications needing superior performance in small packages in both environmentally benign or rugged conditions. Designs are available in lowpass, bandpass, highpass and band-reject responses with various configurations: surface mount,... Read More
Low Cost RF Transmitter Modules
The LC Series is ideally suited for volume use in OEM applications such as remote control, security, identification, and periodic data transfer. Housed in a compact, reflow-compatible surface-mount package, the LC Series modules utilize a highly-optimized SAW... Read More
Master Bond LED401 is a highly innovative, one part LED type system that cures fully upon exposure to a 405 nm wavelength light source where the presence of any UV light is minimal or incidental. In fact, this unique system will fully cure tack-free without any oxygen inhibition. This... Read More
Avago Technologies offers wide selection of LED Displays. It caters for a variety of Displays to meet your applications and requirements.
With our innovative LED Display solutions, customers can choose products from rich color capabilities, to low cost, standard brightness and high ambient... Read More
Avago Technologies is one of the largest producers of visible LEDs in the world and ships billions of products annually. Known for its LEDs’ performance, efficiency and reliability, Avago offers an extensive portfolio of products at globally competitive prices. From a discrete LEDs supplier,... Read More
30% ! This is the weight saved by the lightweight coaxial cables manufactured by Axon' Cable originally designed for the cabling of aircrafts and helicopters. They are light and thin and exhibit excellent mechanical and electrical performance.
Small and highly performing
How to keep the... Read More
PMI offers a variety of limiters covering the DC to 40GHz frequency range. PMI's limiters offer low loss along with low leakage levels. Our limiters can be designed to meet you custom electrical and mechanical specifications.
• DC to 40GHz Models Available
• Surface Mount... Read More
LINC2 is a high performance RF and microwave design and simulation program from ACS. In addition to schematic based circuit simulation, optimization and statistical yield analysis, LINC2 Pro includes many value-added features for automating design tasks, including circuit synthesis.
LINC2’s... Read More
The Visual System Architect (VSA) from ACS includes the stage-by-stage cumulative system budget analyses that are essential to successful system design, analysis, system performance verification and report generation. Full spectral domain analysis provides a spectrum analyzer view of all... Read More
Liquid cooled thermal platforms or LCTPs use a single phase heat transfer fluid to add to or remove heat from the thermal plate. They are connected to a source of conditioned (cooled and or heated) fluid. The conditioned fluid usually comes from a portable or stationary re-circulating chiller or... Read More
PMI Model No. LM-0518-10-1W-SHS-1-F is a high speed, high power, hard diode limiter that operates over the frequency range of 0.5 to 18.0GHz. This limiter handles 100 Watts Peak Power with a pulse width of 1us The insertion loss is less than 2dB typically and has a VSWR of 2.0:1 maximum. This... Read More
PMI Model No. LM-0518-10-1W-SHS-2-M-1218 is a high power limiter that operates from 12.0 to 18.0GHz. This limiter handles 100 Watts Peak Power with a pulse width of 1usec. The insertion loss is only 1.5dB typically and has a VSWR of 2.0:1 maximum. This limiter is supplied in a small housing... Read More
PMI Model No. LM-10G-3-26DBM-12V is an active limiter that operates at 10GHz and provides an input dynamic range of -45 to +26dBm. This limiter offers very hard limiting at 0dBm typically and 3dBm maximum. The VSWR on average is better than 1.4:1 and operating voltage is +12 to +15VDC with a... Read More
PMI Model No. LM-18G40G-18-1W-292FF is an Ultra-High Speed, Millimeter Wave, High Power RF Limiter that operates over the frequency range of 18.0 to 40.0GHz. This limiter can handle input power levels up to 1 Watt CW and provides a leakage output power of +18dBm maximum and +12dBm typical. The... Read More
PMI Model No. LM-18G40G-SMT-1 is a high power limiter capable of withstanding an input power level of 20 Watts, 440 to 670nsec Pulse Width, PRF 600 to 900kHz, 40% Duty Cycle. This model operates in the 18GHz to 40GHz frequency range. The insertion loss is 4.0 dB maximum, VSWR of 2.0:1 and... Read More
PMI Model No. LM-10G-3-26DBM-12V is an active limiter that operates over a frequency range of 1.0 to 2.0GHz with maximum input power of +33dBm CW and a maximum leakage power of -15dBm. The VSWR is 2.0:1 and the operating voltage is +12VDC with a typical current draw of 250mA. The unit is... Read More
Model LM-26G40G-14-20W-292MM is a high power limiter capable of withstanding an input power level of 20 Watts, 440 to 670nsec Pulse Width, PRF 600 to 900kHz, 40% Duty Cycle. This model operates in the 26.5GHz to 40GHz frequency range. The insertion loss is 4.0 dB maximum, VSWR of 2.0:1 and... Read More
PMI Model No. LM-2G18G-2D8-33DBM-12V is an active limiter that operates over a frequency range of 2.0 to 18.0GHz with max input power of +33dBm CW and a maximum leakage power of +2.8dBm. The VSWR is 2.0:1 max the operating voltage is +12VDC with a current draw of 180mA max.. The unit is supplied... Read More
PMI Model Number LM-30M3G-C3-1 is a high power limiter that operates from 30MHz to 3.0GHz. This limiter can handle input power levels up to 5 watts CW and provides a maximum leakage of +10dBm. The insertion loss is 1.2dB maximum with a maximum VSWR of 1.5:1. The recovery time is less than 1usec.... Read More
PMI Model LM-6D7G7D9G-30W-SFF is a RF limiter that operates in the 6.7 to 7.9GHz frequency range. This limiter can handle 30 watts CW input power and provides a maximum leakage of +18dBm. This model has a low insertion loss of 1.1dB maximum and a recovery time of 10usec maximum. This limiters is... Read More
Times Microwave Systems (TMS) manufactures high performance, flexible low loss 50 ohm cables for wireless applications. Known best for their LMR� series of cables, TMS cables are found in a variety of applications, such as 2-way land mobile, cellular, telemetry and other wireless... Read More
Anatech Electronics LNA bandpass filters, and LNA Duplexers, combines a Band pass, or a Duplexer with a low noise amplifier, bringing two essential components together in a compact, ruggedized package that is well suited for Military applications from C thru KU band, or 2-20GHz. Some of our... Read More
The Model 384 provides high-speed logarithmic signal compression from microvolts to volts with exceptional linearity. Both positive and negative polarity information may be processed over a wide range of duty cycles. A null correction loop is available to minimize offset variations.
IPP’s high power RF/Microwave resistor line offers a compact, rugged, high power, high frequency solution to the most demanding applications. IPP resistors are constructed on copper flanges and BeO ceramic for lowest thermal resistance and capacitance. Frequency ranges are available from DC to... Read More
The Low Frequency Division at HUBER+SUHNER is responsible for high-quality RADOX® cables, which reliably fulfil the requirements of demanding applications under adverse conditions. At its own global production locations, the company designs and manufactures individual cores and cables based on... Read More
NIC has introduced a new line of Limiter\Pre-Amplifier\Bandpass Filter Assemblies designed to meet a variety of applications. Typical features are listed below.
- Gain: 22.0 dB
- Noise Figure: Overall less than 1.00 dB (Typical 0.6 dB)
- DC Power: +5.0 Volts (60 mA)
- Ultimate Rejection:... Read More
For over 30 years, Satellink has been providing precision microwave products to customers across a spectrum of industries, with airborne, shipboard, and ground based applications. We offer custom design and manufacturing of high performance low noise amplifiers, with available amplifier types... Read More
Low Noise Amplifiers (LNAs) are used in receive antenna applications, usually placed between the antenna and the receiver to boost very weak incoming signals. LNAs are often used in microwave communication systems to overcome the noise floor generated by cables and other system components. Read More
Reduce EMI up to 20dB With EMC Low Noise Oscillators.
Accelerate compliance approvals – save time and money.
EMC Component Group plug-in oscillators
reduce time to market by conforming
to preexisting designs.
EMC Component Group Low Noise Oscillators are
directreplacements for clock... Read More
Emicon Corporation offers a standard line of Low Pass Filters featuring a decade of cutoff frequencies starting at 2.2 KHz to 430 MHz. All filters have a termination impedance of 50 ohms in and out. These filters have very sharp cutoff characteristics. Read More
MECA Electronics is pleased to announce its latest low PIM attenuators with industry leading -155dBc (typical) passive intermodulation and covering the 698 – 2700 MHz frequency bands. Ideal for IDAS / ODAS, In-Building, base station, wireless infrastructure, 4G, and AWS applications. Always,... Read More
MECA Electronics is pleased to announce its latest Low PIM terminations / loads with industry leading -165dBc (typical) passive intermodulation! All of the terminations cover 398 – 2700 MHz frequency bands. Ideal for IDAS / ODAS, In-Building, base station, wireless infrastructure, 4G, and AWS... Read More
New Surface Mount (.24" Ht. x .55" x.55")
PICO surface mount units utilize materials and methods to withstand extreme temperatures of vapor phase, I.R., and other reflow procedures without degradation of electrical or mechanical characteristics.
• MIL-PRF-27: All units... Read More
The SM700 low profile universal transport antenna covers the full frequency band from 694 to 6000 MHz and operates without additional ground plate. It is a maximum 2.6 inches in height with white radome and one 3/4" hole mount for easy installation.
Frequency Range 1... Read More
Skyworks offers two low-power Bluetooth® low energy (BLE) front-end modules (FEMs) for connected home, wearable and industrial applications. The SKY66110-11 and SKY66111-11 FEMs operate between 2.4 to 2.485 GHz, with power consumption of only 10 mA in transmit mode. They are suitable for... Read More
LP Series antennas are low-cost, reduced height permanently attached 1/4-wave whips. They utilize a precision internal helical element to deliver excellent performance in a significantly reduced package size. The antenna mounts to a PCB via a single screw and meets Part 15 requirements Read More
The recent breakthrough in tuner-control, the iTuner, allows custom programming in many development software packages. LP-Lab is a LabView™-based measurement software that takes advantage of the iTuner’s custom programming. LP-Lab provides a fully functional device characterization core while... Read More
Long Range Wireless Communication Modules
The LR Series is ideal for the wireless transfer of serial data, control, or command information in the favorable 260-470MHz band. The receiver's advanced synthesized superhet architecture achieves an outstanding typical sensitivity of -112dBm, which... Read More
Long Range RF Transceiver Modules
The LT Series transceiver is ideally suited to a diverse range of consumer and industrial applications that require reliable, low-cost, bi-directional communication. It operates in the favorable 260 to 470MHz band, and is designed for full regulatory... Read More
The LX Series of fixed-frequency phase-locked oscillators and serially-programmable frequency synthesizers with optional internal references.
•Frequency: 50 MHz to 6 GHz
•Bandwidth: Fixed, to >50%
•Stability: ±5 ppm (standard), ±2.5 ppm (optional)
•Temperature Range: -30°C to... Read More
The LX Series matrices are reliable, low cost, and versatile switching systems. A modular design concept is used. Interchangeable control modules, switch modules, and display modules can be assembled into matrices, multiplexers, or individual switch point configurations. All chassis have full... Read More
MadgeTech’s Lyophilization Data Logger is designed for use in ultra-low operating temperatures for processes such as Lyophilization. The LyoTemp data logger offers a smart, affordable solution for a wide range of applications including the preparation of biological pharmaceuticals, monitoring... Read More
The LyoTemp Data Logger is designed for use in ultra-low operating temperatures for processes such as Lyophilization. The LyoTemp has an operating range of -60 °C to +75 °C (-76 °F to +167 °F), and is designed with a hermetically sealed thermistor temperature sensing element in a long thin... Read More