Wireless&RF_TLB_8.1.20

Products in the Wireless and RF Online Directory

# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • T-500 Semi-Rigid Cut Off Saw By Seven Associates

    Cutting time for coaxial cable is only 5 to 10 seconds with the Model T-500 Cut Off Saw. Accuracy is .005 or better. Increased operator control contributes to prolonged blade life and smoother cuts. The V groove trough is designed to accommodate two sizes of cables without changes to... Read More
  • T-510MS Semi-Rigid Trim Saw By Seven Associates

    This cable trim saw is an upgraded redesign of the original T-510M and T-511M trim saws. The newer design allows trimming of short cable legs, which is more common in the industry of today. Longer length cables are still easily trimmed by these saws as well. As before, the cable can be trimmed... Read More
  • T-570 Semi-Rigid Panagraph Bender By Seven Associates

    The Seven Associates T-570 Panagraph forms complex semi-rigid cable assemblies (with or without connectors) into any desired bend radius. The bending time is a fraction of that required using hand benders or one time fixtures. Slide bars that accomodate cable or cable with connectors are... Read More
  • T-575 Semi-Rigid Panagraph Bender By Seven Associates

    This bench-top hand bender is designed to enable the user to bend complex semi-rigid coax cables for new design lay-outs or drafted blueprint configurations. Wrinkle free bends are accomplished with the infinitely adjustable slide bar assembly which maintains constant alignment with the desired... Read More
  • T-580 Semi-Rigid Facing Tool By Seven Associates

    This tool has been developed as an efficient means of removing the excess cable jacket, dielectric and solder from various cables and connector styles. It is expecially effective with connector styles that incorporate the inner conductor as the connector center contact pin. The T-580... Read More
  • T-590 Semi-Rigid Pointing Tool By Seven Associates

    The T-590 Pointer was carefully designed to point both straight and bent assemblies. This is made possible by the placement of the cutter at the top left corner of the machine, allowing clearance for most bent assemblies. The unit is adjustable for desired center conductor length... Read More
  • T-7000 Automatic Semi-Rigid Bender By Seven Associates

    Capabilities: Cable type accepted: 0.85 & .141 diameter cable. (.250 diameter capability-custom order) Bend radius minimum: .165 C/L (0.86) minimum: .190 C/L (.141) maximum: .500 C/L Bends per cable: Unlimited Length of cable: 4 feet, custom assemble units up to 8 feet Cable output... Read More
  • T8 Transformers for LED Tube Lighting By Wurth Electronics Midcom Inc

    Wurth Electronics Midcom introduces T8 transformers for LED tube lighting Wurth Electronics Midcom introduces the all new T8 transformer series, specifically designed for T8 sized tube LED applications. These transformers are built using two new packages developed by Wurth Electronics... Read More
  • TAB AND COVER RESISTORS - FLANGED RESISTORS By Innovative Power Products, Inc

    IPP’s high power RF/Microwave resistor line offers a compact, rugged, high power, high frequency solution to the most demanding applications. IPP resistors are constructed on copper flanges and BeO ceramic for lowest thermal resistance and capacitance. Frequency ranges are available from DC to... Read More
  • TAB AND COVER RESISTORS - FLANGELESS By Innovative Power Products, Inc

    IPP’s high power RF/Microwave resistor line offers a compact, rugged, high power, high frequency solution to the most demanding applications. IPP resistors are constructed on copper flanges and BeO ceramic for lowest thermal resistance and capacitance. Frequency ranges are available from DC to... Read More
  • TAB AND COVER RF TERMINATIONS By Innovative Power Products, Inc

    IPP’s high power RF/Microwave termination line offers a compact, rugged, high power, high frequency solution to the most demanding applications. Choose from Tab and Cover, Flanged or Connectorized RF Terminations. IPP terminations are constructed on copper flanges and BeO ceramic for lowest... Read More
  • TADC-1000 High Speed Digitizer By Tektronix Component Solutions

    Providing one channel digitization up to 12.5 GS/s (Gigasamples per second) or two channels up to 6.25 GS/s with 8-bit resolution, Tektronix Component Solutions’ TADC-1000 digitizer module is the world’s fastest commercially available 8-bit ADC (analog-to-digital converter) module. Incorporating... Read More
  • Tantalum oxide (black and white) By Anderson & Steinssen Inc.

    Formula: Ta2O5 CAS: 1314-61-0 Other name: Tantalum(V) oxide Evaporation Material, Nano Material, Oxide Read More
  • TC-ESD By THEMIX Plastics, Inc

    Static dissipative thermoplastic compounds based on alloys of an inherently dissipative polymer and a thermoplastic resin. These products are permanently static dissipative and are humidity independent. TC-ESD products are easily colorable and can be reinforced with glass fibers and/or mineral... Read More
  • TCXO - Temperature Compensated Crystal OScillator By Vanlong, Inc.

    Temperature compensated crystal oscillators are essentially crystal oscillators which are tuned over temperature by a network in such a manner as to compensate for the natural temperature drift of the uncompensated crystal oscillator. Read More
  • TCXO - Temperature Compensated Crystal Oscillators By Greenray Industries Inc.

    Greenray TCXOs are designed for communications, instrumentation and military applications. Our TCXOs feature temperature stabilities of 1ppm or less and are available in a variety of packages, including SMT, and are available from 20 KHz to 1 GHz. We incorporate leading-edge design and... Read More
  • TD-6G18G-CD-SFF High Speed Threshold Detector By Planar Monolithics Industries, Inc.

    PMI Model No. TD-6G18G-CD-SFF is a high speed threshold detector designed to operate over the 6.0 to 18.0GHz frequency range with an adjustable threshold level of -30 to +10dBm and aVSWR of 3.0:1 max. The unit is supplied with removable SMA female connectors in a compact housing that measures... Read More
  • TDAC-2000 High Speed DAC By Tektronix Component Solutions

    The TDAC-2000 is the world’s fastest commercially available 10-bit DAC (digital-to-analog converter) module, providing single-channel waveform generation at 12 GS/s (Gigasamples per second). Providing access to proprietary Tektronix ASIC technology, the TDAC-2000 is able to sustain... Read More
  • TDR probe By Inter-Continental Microwave

    ICM TDR Probes feature fixed or adjustable ground spacing making them suitable for multiple applications. They are designed with Super-SMA connectors and usable to 6.0 GHz. 3.5 mm Calibration Standards can be used with the ICM Calibration Adapters. These probes are very rugged with field... Read More
  • TDRO-900A Dielectric Resonator Oscillator By Tektronix Component Solutions

    The TDRO-900A is an instrument-grade 9.0 GHz oscillator that uses the high-Q property of a dielectric resonator to tightly control the frequency of oscillation. The TDRO-900A offers: ± 2.5 MHz of Electrical Tuning Range around 9 GHz Center Frequency Low SSB Phase Noise: -114 dBc/Hz @ 10 kHz... Read More
  • TED6000-50 By Telemakus, LLC

    True RMS power sensor with frequency range 50MHz to 6GHz. Dynamic range 50dB and accuracy of 0.5dB. The unit us controlled via USB. This PC software required is stored on internal flash memory which also contains calibration data. Both XP and Vista are supported. Applications include power... Read More
  • Teflon By Polymer Plastics Corp.

    TFE or PTFE, polytetrafluoroethylene, more commonly known as Teflon, is one of the three fluorocarbon resins in the fluorocarbon class composed wholly of fluorine and carbon. The other resins in this group, also referred to as Teflon, are PFA and FEP and is reviewed under that heading. The... Read More
  • TEG2700-6 By Telemakus, LLC

    Synthesized RF signal generator covering a range of 1.8-2.7GHZ with a minumum of +6dBm output. The phase noise is -105dBc/Hz at 100KHz offset. The unit is powered and controlled via USB. The control software is stored on the device in flash memory allowing a very fast installation. The GUI... Read More
  • TEK MDO4104 By TRS-RenTelco

    4 Analog Channels 500 MHz or 1 GHz Bandwidth Models 16 Digital Channels MagniVu High-speed Acquisition provides 60.6 ps Fine Timing Resolution 1 RF Channel 50 kHz - 3 GHz or 50 kHz - 6 GHz Standard Passive Voltage Probes 3.9 pF Capacitive Loading and 500 MHz or 1 GHz Frequency Range... Read More
  • Tek MSO72304DX By TRS-RenTelco

    MSO/DPO70000DX series are updated, enhanced versions of 70000D oscilloscopes. The 70000DX family introduces six new DPO and MSO models at 23GHz, 25GHz, and 33GHz bandwidths. Read More
  • Tektronix - TDS2014B By TRS-RenTelco

    Features & Benefits: * 100 MHz Bandwidths * Sample Rates up to 2 GS/s Real Time * 4 Channels * Color LCD Display * Removable Data Storage via Front Panel USB Port * Seamless PC Connectivity via USB Device Port, with OpenChoice and NI SignalExpress PC Software * Advanced Triggers Including Pulse... Read More
  • Telemetry & Remote SCADA Solutions By Schneider Electric

    Schneider Electric, Telemetry & Remote SCADA Solutions, is a global supplier of remote automation solutions for SCADA systems in oil and gas, water and electrical utilities applications. Solution components include Accutech wireless instrumentation, SCADAPack controllers, Trio long-range data... Read More
  • Teleport Spectrum Analyzers By Avcom of Virginia Inc

    Our rack-mount SNG or portable PSA products perform flawlessly whether peaking an antenna or using it as a carrier monitor. If rack space is a premium then we have you covered with our RSA line of spectrum monitors that are remote interface only using a minimum of 1RU or even a ½ of 1RU... Read More
  • Tellurium Dioxide By Anderson & Steinssen Inc.

    Formula: TeO2 CAS Number: 7446-07-3 Read More
  • TENN/Jr - Temperature Chamber By TRS-RenTelco

    Environmental chamber (temperature only). 1.25 cubic foot working space. Temperature range: -75C to 200C. Interior dimensions: 16%22 W x 12%22 H x 11%22 D. Exterior dimensions: 37%22 W x 31%22 H x 22%22 D. Includes Watlow 942, 24-step programmable controller and RS-232-C interface. Read More
  • Termination Finish Conversion / Tin Whisker Mitigation By AEM Inc.

    The AEM tin / lead conversion process is effective for most chip size passive components including capacitors, inductors, resistors, ferrite chip beads, fuses, resistor arrays, capacitor arrays, bead arrays, and many molded body passive and active surface mount component types. Read More
  • Terminations By XMA Corporation

    DC-50 GHz- Up to 500 W Read More
  • Terrace By Vecima Networks Inc.

    The Terrace MDU gateway is a multi channel QAM to analog RF converter. Demodulated MPEG-2 transport streams from multiple QAMs are decrypted, decoded to analog, then converted to the correct RF channel. The Terrace can demodulate up to 16 QAM carriers, select the MPEG-2 transport streams and... Read More
  • TES6000-30 By Telemakus, LLC

    RF switch with built in pulse modulator covering the frequecy range 100MHz to 6GHZ. Isolation of 30dB at 4GHz and switching speed of 33nS. The switch has a P0.1dB of 29dBm and a IP3 of +49dBm at 6GHz. The internal pusle modulator function allows the user to set pulse width and rate using a PC... Read More
  • Test Engineering Services By Averna

    Whether your current challenge is in developing pre-functional, functional or maintenance and repair systems, Averna can help you design, develop, deploy and service your Automated Test Equipment (ATE) and Test Program Set (TPS) systems over the course of the product or system lifecycle. A... Read More
  • TestBencher Pro By SynaptiCAD the Timing Diagram Editor Company

    TestBencher Pro provides designers with a graphical environment for rapidly generating and testing bus-functional models for VHDL and Verilog. Graphical timing diagrams and a top-level template file are used to generate the test bench code. The graphical timing diagrams represent reusable bus... Read More
  • TH 4092 Ka-band TWT By Thales Components Corp.

    Thales TH 4092 traveling wave tubes have been developed to address civil and military satellite operators working with Ka-band. The TH 4092 delivers an exceptional output power up to 550W peak and 350W CW in 27,5 to 31 Ghz band. It features a four-stage collector technology designed for a very... Read More
  • The STI-9400 Laptop Signal Measurement & Analysis System By Survey Technologies Inc

    From measurement to report, it's the most complete, cost-effective, and easy-to-use laptop signal analysis system on the market. Now you can analyze RF signal coverage completely, get real time results, and even print your reports while in the field. The STI-9400 series systems incorporate a... Read More
  • The STI-9450 Signal Measurement & Analysis Kit By Survey Technologies Inc

    The STI-9450 is essentially the same scanning receiver and GPS based signal measurement and analysis system as the STI-9400, except you supply the laptop computer. The STI-9450 includes: STI Field Test 6 software, a GPS and scanning receiver 1MHz to 1GHz contained within mounting hardware, a... Read More
  • Thermal Vacuum Chambers (Space Simulation) By Environmental Stress Systems, Inc.

    The ESS, Inc. Space Simulation Thermal Chamber or SSTC has been developed to allow simultaneous thermal vacuum testing of electronic components that may be heated and cooled by direct conduction. The SSTC is a fast, portable and cost effective solution for testing components that must be... Read More
  • Therm-A-Lert Data Logger By MadgeTech Inc

    The MadgeTech Therm•A•Lert is a temperature monitoring and alarming system, designed specifically for laboratories, warehouses and other environments where temperature monitoring is critical. The system can be used to monitor a single location, or expanded to monitor hundreds of locations over a... Read More
  • Therm-A-Lert-P Data Logger By MadgeTech Inc

    The MadgeTech Therm•A•Lert-P is a temperature monitoring and alarming system, designed specifically for laboratories, warehouses and other environments where temperature monitoring is critical. The system can be used to monitor a single location, or expanded to monitor hundreds of locations over... Read More
  • Therm-A-Lert-RH By MadgeTech Inc

    The MadgeTech Therm•A•Lert-RH data logger is a humidity and temperature monitoring and alarming system. Designed specifically for laboratories, warehouses and other environmentally monitored spaces, the Therm•A•Lert-RH provides real time wireless notifications of humidity levels as well as... Read More
  • Thermoelectric Cooled Low Noise Amplifiers By Satellink Inc

    For over 30 years, Satellink has been providing precision microwave products to customers across a spectrum of industries, with airborne, shipboard, and ground based applications. We offer custom design and manufacturing of high performance low noise amplifiers, with available amplifier types... Read More
  • THE-THERM By THEMIX Plastics, Inc

    Thermally conductive thermoplastics. Available in many different polymers and thermal conductivities from 0.5 W/mK to as high as 20 W/mK. Products are designed to provide thermal solutions where heat dissipation is required. Read More
  • Thin-Trim® Trimmer Capacitors By Johanson Manufacturing Corp

    Our Thin-Trim capacitors are ideal for applications where size and performance are most critical. These single-turn capacitors exhibit remarkable electrical characteristics for their small size. Useful up to 2 GHz, these trimmers are perfect for low-profile applications. Read More
  • THOR Series By EM Research Inc

    THOR Series: Frequency Synthesizer Designed for VSAT Radio Receiver The THOR-14000 frequency synthesizer from EM Research is used as a Local Oscillator for a VSAT Radio Receiver. The unit operates from 13800 to 14000 MHz with 1MHz step size utilizing a 10 MHz reference. The THOR-14000... Read More
  • Three-Phase Power Line Filters By Curtis Industries / Tri-Mag

    Features: - EMC solutions up to 600A at 600VAC and power applications up to 360kVA - 2-stage filter line supports both Delta and Wye connected loads - Effective noise suppression in the critical 150kHz-30MHz range Applications include: - Motors - Food preparation equipment &... Read More
  • TimingDiagrammer Pro By SynaptiCAD the Timing Diagram Editor Company

    Timing Diagrammer Pro is a feature-laden timing diagram editor with an unbeatable price. Analyze your design in the early stages, before you have a schematic. Perform true full-range min/max timing analysis to eliminate all timing violations and race conditions. Timing Diagrammer Pro... Read More
  • Tin oxide By Anderson & Steinssen Inc.

    Formula: SnO2 CAS Number: 18282-10-5 Other Name: Tin(IV) oxide Evaporation Material, Nano-material Read More
  • Titanium dioxide By Anderson & Steinssen Inc.

    Formula: TiO2 CAS Number: 13463-67-7 Evaporation Material, High Purity Read More
  • Titanium Dioxide (Rutile) By Anderson & Steinssen Inc.

    Formula: TiO2 CAS Number: 1317-80-2 Read More
  • TLY Family of Low Loss Laminates By Taconic

    TLY laminates are manufactured from very lightweight woven fiberglass and are much more dimensionally stable than non-reinforced PTFE composites. The woven matrix yields a more mechanically stable laminate that is suitable for high volume manufacturing and the low Df enables successful... Read More
  • TNC 4 Ghz Male to Female 20 DB Attenuator By Field Components Inc.

    TNC Male to Female Attenuator. DC-4.0 Ghz. 20 DB, 2 Watts Average, Passivated Stainless Steel. Other DB values also available. Read More
  • Tooling and Accessories By Nemal Electronics Intl Inc

    Nemal manufactures a complete line of termination tooling and installation accessories for all of our cable and connector products. We also offer complete kits for termination and testing of HDTV SMPTE fiber optic camera cables. Please see the tooling cross reference in our catalog or call our... Read More
  • Torque Wrench By Anoison Electronics LLC

    ANOISON torque wrenches are used to properly install or disassemble a wide range of coaxial connectors. This series of torque wrenches is designed with a preset torque value. When the preset torque value is reached, it will "break" and move through a small arc about the pivot pin. Click... Read More
  • Tortoise Multi-Band Stimulus Transmitter By Berkeley Varitronics Systems

    Tortoise™ is a portable, rugged, high-power transmitter system composed of dual independent, transmitter modules giving the user freedom to transmit on any 2 unique frequency bands simultaneously without the need for expensive and bulky additional transmitters. Tortoise™ features two dynamically... Read More
  • TR1300/1 2-port Vector Network Analyzer By Copper Mountain Technologies

    The Compact VNA TR Series TR1300/1 is a 2-port, 1-path vector network analyzer intended for the measurement of S11 and S21 parameters. It represents an excellent low cost solution for magnitude and phase measurements in the frequency range of 300 kHz to 1.3 GHz. With a weight of just 3.3 lbs, it... Read More
  • TranfoLINK-45 By Meridian Microwave LLC

    The TrangoLINK-45® is a 5 GHz multi-band wireless backhaul radio that delivers up to 45 Mbps of sustained usable data throughput using OFDM technology. The multi-band feature provides a choice of 5.2, 5.3, 5.4 or 5.8 GHz in the convenience of one radio, enabling valuable operational fl... Read More
  • Transfer switches By e360microwave, inc.

    e360 microwave offers Transfer switches with either failsafe or latching actuators and covering the frequency range from DC to 30 GHz with a wide variety of connectors types, actuator voltages and other options. These switches are ideal where circuit redundancy is needed. For example switching... Read More
  • Transformers By Synergy Microwave Corp.

    Low Cost Wide Bandwidth Good Amplitude / Phase Unbalance Rugged Welded Construction RoHS Compliant Patented REL-PRO Technology 0.150” x 0.150” x 0.150” Read More
  • Transimpedance Amplifiers By Analog Modules Inc

    Analog Modules, Inc. (AMI) designs and manufactures a range of transimpedance amplifiers for OEM, medical and research applications. AMI's amplifiers combine low noise, high gain, large dynamic range, and small package size. Read More
  • True Blue® flexible cable assemblies By Teledyne Storm Microwave

    Low loss assemblies that provide a great balance of loss, cost, & durability. Excellent insertion loss and phase stability. Durable construction less prone to damage during installation or use. Available in several sizes and a wide variety of connector interfaces, including blindmate &... Read More
  • TSFB-900A Switched Filter Bank By Tektronix Component Solutions

    The TSFB-900A is an instrument-grade, nine-channel switched filter bank module that operates from 8-22 GHz and delivers the following performance: Tunable frequency range: 8-22 GHz Nine bands with 1.5-2.0 GHz bandwidth ≥ 80 dBc Rejection to 50 GHz The TSFB-900A is an ideal fit for... Read More
  • TSM-DS By Taconic

    TSM-DS is a thermally stable, industry leading low loss core that can be manufactured with the predictability and consistency of the best fiberglass reinforced epoxies. Other features of this dimensionally stable laminate include industry best Df at .0010 @ 10 GHz, low (~5%) fiberglass content,... Read More
  • Tunable Band Reject / Notch By Wainwright Instruments GmbH

    Since 1979 we design and manufacture lowpass, highpass, bandpass, band reject, notch, diplex and multiplex, as well as manually and digitally tunable filters. Among others we specialize on L/C (Cauer, Chebyshev and Butterworth), cavity and helical designs. We offer many standard designs with... Read More
  • Tunable Bandpass Filter By Wainwright Instruments GmbH

    Since 1979 we design and manufacture lowpass, highpass, bandpass, band reject, notch, diplex and multiplex, as well as manually and digitally tunable filters. Among others we specialize on L/C (Cauer, Chebyshev and Butterworth), cavity and helical designs. We offer many standard designs with... Read More
  • Tungsten Alloy By Ed Fagan Inc.

    Tungsten Alloys (also known as Mallory 1000, Densalloy, Fansteel 77, Densimet) which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their... Read More
  • Turnkey Installation By Meridian Microwave LLC

    Our turnkey installation services are performed by highly trained, qualified and motivated personnel. Experience eliminates guess work, employing best practices for quality installations that are mechanically sound, aesthetically pleasing and that stand the test of time. Turnkey... Read More
  • Two-channel fiber optic rotary joint (MJ2 series, MM) By Princetel, Inc.

    The dual-pass Fiberoptic Rotary Joint (FORJ) connects two independent fiber channels simultaneously. It allows uninterrupted transmission of optical signals while rotating along the common mechanical axis. The device accommodates two standard multimode fibers. Check out our MXn series FORJs for... Read More
  • TWT Amplifiers (TWTAs) By dB Control

    Our high-power, helix and coupled cavity traveling wave tube (TWT) amplifiers are built to withstand the harsh environmental conditions encountered by ground-based mobile systems, as well as unpressurized airborne environments. Even our first TWT amplifier, an airborne unit for Tracor Aerospace... Read More
  • TWT, Mini By L-3 Electron Devices

    Electron Devices has a complete line of mini tubes, covering multi-octave bandwidths over the frequency range of 2 to 46 GHz with output powers of up to 150 Watts. The tubes have multi-stage collectors for high efficiency, are of rugged thermal design and offer long life through superior gun... Read More