Circuit Board Shields
Leader Tech's Circuit Board Shielding provides board level protection from EMI. Available in a broad range of sizes, the snap-in dimple design provides a positive contact and downward stop while allowing removal of the cover for accessibility. Read more »
Circuit Breaker Test Sets
Circuit Breaker Test Sets are suitable for a wide variety of testing requirements including low-voltage power and molded-case circuit breakers. In addition Circuit Breaker Test Sets are used to test thermal, magnetic or solid-state motor overload relays and other over current protective devices.... Read more »
Circulator
Application： ◇ Isolator and Circulator are widely used in various civil and military communication equipment Feature： ◇ Frequency range (0.3GHZ - 18GHZ), Relative bandwidth (2% - 80%) ◇ High power handling and high isolation over 40dB～100dB ◇ Low loss, typical value is less than 0.15dB... Read more »
Circulators & Isolators
An RF isolator is a two-port passive device made of magnets and ferrite material which is used to protect other RF components from excessive signal reflection, while an RF circulator is a three-port passive device used to control the direction of signal flow in a circuit. MECA offers thirty models... Read more »
Class D Amplifiers
Si2704/05/06/07 The Si2704/05/06/07 family of 2x5W EMI-mitigating Class D audio amplifiers combine Class D efficiency and digital signal processing fidelity to solve difficult Class D amplifier radiated noise problems: EMI compliance AM/FM radio co-existence Smart phone compatibility Read more »
CLB Series Low Frequency Power Supplies
RF generators from the CLB product family are available in power ranges from 2500 to 12,000 Watts at a single frequency in the 20 kHz to 2 MHz band. The Turbotune Technology within the unit allows frequency tuning by automatically varying its output frequency +/-10% around its nominal frequency.... Read more »
CLX Series
Frequency Synthesizer with exceptional overall performance. Internally-programmed fixed-frequency. 200 MHz to 4 GHz. Surface mount package, 075" x 0.75" x 0.25". Excellent phase noise, -110 dBc/Hz @ 10 KHz. CLX Series Exceptional Phase Noise PRODUCT FEATURES • Fixed-frequency, internally... Read more »
CN Series
CN Series "corner-style" antennas feature a wide >70MHz bandwidth, 25dB front-to-back ratio, high gain, and a wide beamwidth. These rugged antennas are constructed to withstand the stress of long-term use. They are designed for 50-ohm system matches with a maximum input of 100W. Read more »
Coax Adapters
Available in the following waveguide sizes: WR28 thru WR975 with different type connectors. Connector and flange types are made to customer specifications. Custom waveguide flanges and sizes to your own specifications are also possible. Contact us for details. For most of the models a typical... Read more »
Coax Assemblies for Hirose U.FL and I-PEX
Miniature RF Coax Cable Assemblies for Hirose U.FL and I-PEX MHF Applications Many wireless PC board RF modules use Hirose U.FL or I-PEX MHF miniature ¬connectors. Jumper cables are used to connect the PC board to the device housing or case. RF Connectors, a division of RF Industries, offers... Read more »
Coax Directional Couplers
M2 Global offers coax directional couplers for cellular and PCS bands, as well as for a wide range of octave band and narrow band frequencies up to 26.5 GHz. Read more »
Coax power dividers
M2 Global offers 2-way and 4-way power dividers for octave and wide frequency bands from 0.5 to 26.5 GHz. Connectors are N-type or SMA Read more »
Coaxial Adapters N, SMA, 2.92mm, 3.5mm, 2.4mm
Microwave Coaxial adapters available from stock. SMA, N, TNC, QMA, 7/16, 2.92mm, 3.5mm, 2.4mm. In series and between series. See inventory levels and order online. Read more »
Coaxial Attenuators
Coaxial Attenuators used for test and measurement applications are offered by Field Components. Attenuators reduces the amplitude or power of a signal without distorting its waveform. Fixed attenuators in circuits are used to lower voltage, dissipate power, and to improve impedance matching. Field... Read more »
Coaxial Cables
Federal Custom Cable provides bulk coaxial - cable for the military, commercial, and the RF-wireless markets. Federal Custom Cable cables meet or exceed QPL Military Spec Mil-C-17 specifications. Federal Custom Cable offers a wide range of flexible, semi-rigid & conformable - coaxial cables. The... Read more »
Coaxial Circulator
Wenteq Microwave Corporation Offers high performance coaxial circulators, both wide band and narrow band, from 20 MHz to 18 GHz. Read more »
Coaxial circulators
Coaxial circulators are available for frequencies between 380 MHz and 31 GHz, with power ratings up to 700W. Options include octave band, dual junctions, and encapsulation. Read more »
Coaxial Detectors
Visit the Krytar website to learn more about its Coaxial Detectors. Read more »
Coaxial Directional Couplers
Coaxial directional couplers from Field Components include: 6dB 1GHz T-type directional couplers; 9dB 1GHz T-type directional couplers; 6dB 1GHz plate-mt directional couplers; 30dB 1GHz plate-mt directional couplers; and, more. Read more »
Coaxial Isolator and Circulator
Coax Isolator & Circulator Wide & Narrow band or Hi - Power Frequency Range 80 MHz to 27 GHz. Standard Isolator 1, 10 Watt MTC offer a wide range of narrow and wide bandwidth RF and microwave isolators and circulators product in Coaxial and Drop-in configurations that extend from 200 MHz to... Read more »
Coaxial Isolators
Wenteq Microwave Corporation Offers high performance coaxial Isolators, both wide band and narrow band, from 20 MHz to 18 GHz Read more »
Coaxial isolators
Coaxial isolators are available for frequencies between 380 MHz and 31 GHz, with reverse power ratings up to 200W. Options include octave band, dual junctions, and encapsulation. Read more »
Coaxial Switches
Dow-Key's coaxial switches are available from SPDT (1x2) up to SP14T (1x14) and they are bidirectional. The SPDT, Transfer DPDT (2x2), and SP3T thru SP6T switches are offered up to 40 GHz, while the SP7T thru SP14T switches are available up to 18 GHz. This line of products supports any number of... Read more »
Coaxial-to-Coaxial Adapters
Visit the website to see a list of coaxial adapters offered by Krytar. Read more »
CobaltFx FET1854 Frequency Extension System, 18 to 54 GHz
CobaltFx cost-effective millimeter wave frequency extension system allows you to build a scalable and affordable 5G testing solution. Frequency Range: 18-54 GHz Connector Type: Coaxial NMD 1.85mm The system can be anchored by your choice of four vector network analyzers: C4209 2-port 9 GHz... Read more »
CobaltFx FEV-10 Frequency Extension System, 75 to 110 GHz
CobaltFx cost-effective millimeter wave frequency extension system allows you to build a scalable and affordable 5G testing solution. Frequency Range: 75-110 GHz Connector Type: Waveguide WR10 The system can be anchored by your choice of four vector network analyzers: C4209 2-port 9 GHz VNA C4409... Read more »
CobaltFx FEV-12 Frequency Extension System, 60 to 90 GHz
CobaltFx cost-effective millimeter wave frequency extension system allows you to build a scalable and affordable 5G testing solution. Frequency Range: 60-90 GHz Connector Type: Waveguide WR12 The system can be anchored by your choice of four vector network analyzers: C4209 2-port 9 GHz VNA C4409... Read more »
CobaltFx FEV-15 Frequency Extension System, 50 to 75 GHz
CobaltFx cost-effective millimeter wave frequency extension system allows you to build a scalable and affordable 5G testing solution. Frequency Range: 50-75 GHz Connector Type: Waveguide WR15 The system can be anchored by your choice of four vector network analyzers: C4209 2-port 9 GHz VNA C4409... Read more »
Coil, Strip - Special Purpose Metals and Alloys
If you need specialty metals or alloys coil or strip, for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of rod and bar products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut... Read more »
Cold Traps for condensing and freezing water vapor
Cold traps are used to condense and freeze or "trap" water vapor. They are often used in a drying process for substation electrical transformer oil. A vacuum pumping system is used to lower the pressure in the transformer case and allow the water to vaporize. The water vapor travels into the... Read more »
Compact LNAs 0.5 to 20 GHz
CTT’s line of low-noise, solid-state, amplifiers cover a wide range of applications in narrowband and wideband frequencies through 20 GHz. The new "AM" Series LNAs are based on GaAs pHEMT active devices with input and output impedance matching. Suitable for both commercial and military... Read more »
Compact Low Cost Video Switching Systems
These compact systems provide the ultimate for both analog and serial digital video routing. Compact and feature loaded, the units are only 1RU or 2RU high and are turn-key out of the box for quick and easy integration. These units deliver high video signal performance coupled with advanced... Read more »
Compact Opto-Electronic Oscillator (OEO)
Compact OEO offers extremely low phase noise and low vibration & acceleration sensitivity for signal source modules required in high-frequency, high performance applications. Available in any output frequency between 10 - 12 GHz (consult factory for other frequencies). Compact OEO offers typical... Read more »
Compact PCI power supplies
Martek Power offers 3U and 6U height AC-DC (90-264 Vac) and DC-DC (36 - 72 Vdc) Compact PCI (cPCI) rack mount power solutions with Output Power up to 350 watts. Our power factor corrected Compact PCI units are parallelable for N+1 applications and NEBS Compliant. The fault protected units are also... Read more »
Compression Mount RF Connectors
• Fast and easy solderless installation • No damage to PCB board • Cost effective testing solutions • Series: SMA, 2.92mm, 2.4mm & 1.85mm • COTS versions available now! • DC to 67 GHz Read more »
Computer Controlled, Solid-State RF Switch Matrices
PMI offers a full product line of RF Switch Matrices that operate over the 20MHz to 40GHz frequency range. Three standard models are offered that cover this frequency range, namely 20MHz to 3.0GHz, 2.0GHz to 18.0GHz, and 18.0GHz to 40.0GHz. Any of the three models can be supplied as either a 4 X... Read more »
Concierge
The Concierge IP to QAM (with Pro:Idiom) is a high density, IP to QAM converter compatible with satellite, cable and IPTV operators that offer continuous, high performance operation for free-to-gues (FTG) and VOD services. It is ideal for hospitality locations requiring a cost effective solution... Read more »
Conduction Cooled Termination
BroadWave Technologies has developed a small, light weight 100 Watt termination. Model 551-199-100 is a space saving 50 Ohm, DC-3 GHz load with an SMA male connector. Conduction cooled terminations mount to a customer provided heat sink, exhibit 1.25:1 maximum VSWR with an operating temperature... Read more »
Conductive Elastomer
Leader Tech announces that the company’s newly expanded line of TechSIL Conductive Elastomer compounds received QPL certification by the Defense Logistics Agency. This unrivaled commitment to excellence distinguishes Leader Tech as the only MIL-SPEC approved & certified manufacturer of conductive... Read more »
Conformal Coatings
Conformal coatings are essential materials for enhancing the long term reliability and performance of electronic assemblies, particularly when exposed to harsh conditions such as high humidity, corrosive chemicals and extreme temperatures. Master Bond Inc. offers a complete line of conformal... Read more »
Connectorized 90 DEGREE HYBRID COUPLERS
IPP's -3dB 90 Degree Coupler Line offers low insertion loss, low VSWR and high power capability in a small package. These products are available in narrow and broadband bandwidths making them ideal for power amplifier applications. Frequency Range is from 30 MHz to 6.0 GHz. in power levels up to... Read more »
CONNECTORIZED COMBINERS
IPP offers a full line of RF/Microwave in-phase Combiners/Dividers in various split ratios, frequencies and power levels up to multi-kilowatts. Combiners/Dividers are available in connectorized packages as well as custom drop-in configurations. IPP Combiners/Dividers offer low loss and VSWR while... Read more »
CONNECTORIZED DIRECTIONAL COUPLERS
IPP's line of Directional Couplers offers some of the widest bandwidths at the highest power in the industry. Our unique designs allow us to achieve better coupling flatness, low VSWR and low through line loss. Available in frequencies from 20 MHz. to 6.0 GHz., in power levels up to 1,000 Watts CW.... Read more »
CONNECTORIZED RF TERMINATIONS
IPP’s high power RF/Microwave termination line offers a compact, rugged, high power, high frequency solution to the most demanding applications. Choose from Tab and Cover, Flanged or Connectorized RF Terminations. IPP terminations are constructed on copper flanges and BeO ceramic for lowest... Read more »
Connectors
Federal Custom Cable offers a complete range of RF/Microwave connectors such as 1.0/2.3, 7/16, BNC, BNC 75 Ohms, BNC-Reverse Polarity, BNC Twinax, C, D-Sub, FME, HN, LC, MCX, MMCX, Mini-UHF, N, SHV, SMA-Reverse Polarity, SMA, SMB, SMB 75 Ohms & Mini 75 Ohms, SMC, SMC 75 Ohms, SMP, SSMA, SSMB, TNC,... Read more »
Connectors for High-Performance, Low-Loss Custom Fabricated Cable
Wireless communication systems of today require high performance RF cable assemblies built to custom lengths using a variety of connectors. RF Cable Assembly, a division of RF Industries, fabricates custom assemblies with Times Microwave LMR-400 high performance low loss cable. Assemblies are... Read more »
Consulting Services
Our compliance consulting staff has the expertise to help with your safety and EMC compliance requirements for your new products. Whether you are in the very first stages of the product development process or in the final design, our consultants can assist in mapping critical compliance milestones... Read more »
Contract Manufacturing
Specialty Contract Manufacturing Services - Full vacuum encapsulation, pressure cure and conformal coating laboratory - Transformer winding and testing capabilities - Quick turn around - Small quantity specialists - Blanket orders with JIT (Just-In-Time) delivery Certifications -... Read more »
Controlcat New Horizons in Temperature, Pressure, Flow and much more!
DILBERT™ CONTROLCAT NEW HORIZONS® in Temperature, Pressure, Flow and More! Version No. 28 Contains over 150 full color pages of state-of-the art products separated into 7 sections: Automation, Sanitary, Temperature, Electric Heaters, Wireless/Data Acquisition, Pressure/Strain/Force, and... Read more »
ConvertaWave2™ RF Downconverter
The RF200-2500RV1 ConvertaWave2™ receiver is a state-of-the-art miniature RF Tuner/Receiver utilized for down-conversion of RF signals in the band of 200 MHz to 2.5 GHz. The RF200-2500RV1 provides high dynamic range performance over the 200 MHz – 2500 MHz frequency range, in frequency steps of 1... Read more »
