µFILTER™
NuWaves' uFILTER™ family of filters provide high-performance in a small package. The product line consists of Standard Filters (SF) and Custom Filters (CF). µFILTER™: CUSTOM FILTER (CF) and STANDARD FILTER (SF) SELECTION OF HIGH PERFORMANCE RF FILTERS NuWaves' uFILTER™ family of filters... Read more »
0.1 to 18.0GHz, Variable Gain Amplifier
PMI Model No. PTB-40-0R118-6R5-21-120VAC-1U-SFF PMI Model number PTB-40-0R118-6R5-21-120VAC-1U-SFF is an integrated microwave assembly that provides high gain and operates from 100MHz to 18.0GHz. This unit features integrated digitally controlled attenuators with ranges up to 60dB. The... Read more »
0.7 - 1.2 GHz Very High Linearity, Active Bias Low-Noise Amplifier - SKY67111-396LF
A 0.7-1.2 gigahertz, single-die cascode, gallium arsenide (GaAs), pseudomorphic high electron mobility transistor (pHEMT) low-noise amplifier (LNA) for cellular infrastructure applications such as tower-mounted amplifiers, remote radio units, repeaters, and base stations. The new LNA offers very... Read more »
0.8-20.0 GHz Pre-Channelized Dual Conversion Selectable IF Bandwidth Miniature Tuner
AKON’s A20-MX218 is a 0.8 to 20 GHz microwave tuner that features a 30 dB dynamic range expander, an integrated input switch/limiter and launches through the LNA. The unit feathers an 8-channel filter bank preselector which eliminates received image frequencies. The unit features dual conversion... Read more »
0402 SMD Thin Film Ceramic Chip Inductors
AL0402TF-XXXY is a family of a SMD Thin Film Ceramic Chip inductors with a high SRF, Excelent Q and good temperature stability. This family of parts is offered in values ranging from: 0.20nH(800mA) to: 27.0nH(75mA) with the following tolerances: J: ± 5%, H: ± 3%, G: ± 2%, F: ± 1%. And B: ± 0.1nH,... Read more »
0402 SMD Wire Wound Ceramic Chip inductors
0402C-XXX is a family of a SMD Wire Wound Ceramic Chip inductors with a high Q at high Frequency and SRF up to 12.7 GHz.This family of parts is offered in values ranging from: 1.0 nH(1360mA) to: 68nH(100mA) with the following tolerances: K: ± 10% J: ± 5%, G: ± 2%. The Operating Temperature is from:... Read more »
0725 Directional Antenna
LTE/CDMA800/GSM/3G/WLAN/Wimax Wireless communications and data transmission system、Repeater Indoor and outdoor directional coverage Read more »
0727 Celling Antenna
698~960/1710~2700MHz Band Indoor coverage system Wireless communication system Wireless data transmission TDD/FDD-LTE Read more »
0822/LTE Combiner
Application: Used in CDMA+GSM+DCS+3G/LTE In-building coverage Feature: High power handling ,High isolation, Low loss, Low PIM, IP66 Environment . Read more »
1" Standard Cable Cage Polypropylene J-Hook, Size 16, Load Capacity-14 lbs
J-Hooks - The perfect solution for heavy duty hanging applications. Traditional style, construction grade, multi-purpose J-Hooks, provide stress free cable support and help organize and build a distribution pathway for various types of cables. some popular uses would be for above-suspended... Read more »
1.0 to 18.0GHz, 10 Watt, High Speed, SPDT Switch
PMI Model No. P2T-1G18G-10-R-528-SFF-HIP10W PMI Model P2T-1G18G-10-R-528-SFF-HIP10W is a 1.0 to 18.0GHz, Solid-State SPDT switch that can handle up to 10 watts CW of input power for all operating conditions. This switch provides ultra-fast switching speeds of 40nsec, 25dB of isolation and... Read more »
1.0GHz to 40.0GHz, Portable Amplifier
PMI Model PTB-42-1G40G-12-292FF-DC12 is a portable amplifier that operates over the 1.0 to 40.0GHz frequency range. This model provides 40dB of typical gain with an OP1dB of +22dBm typical (1-18GHz) and +18dBm typical (18-40GHz). This amplifier features an on / off switch that is located on the... Read more »
1.0mm
1.0mm connectors are 50 ohm precision connectors designed to perform mode free to 110 GHz. The outer conductor measures 1.0mm and the robust wall of the connector body is designed to engage before the center conductor, assuring a rugged, repeatable mating interface. The interface is air... Read more »
1.85mm
1.85mm connectors are 50 ohm precision connectors designed to perform mode free to 65GHz. The outer conductor measures 1.85mm and the robust wall of the connector body is designed to engage before the center conductor, assuring a rugged, repeatable mating interface. The interface is air dielectric... Read more »
1.85mm adapter
Impedance: 50 Ω Body: Stainless Steel, Passivated Pin Contact: Beryllium Copper Alloy,Gold-plat Insulator: PEI Frequency range: 0~65 GHz VSWR: 1.25:1 Read more »
10 Series Enclosure from Emcor Enclosures/Crenlo
The Emcor 10 Series enclosure product line from Crenlo delivers a unique combination of exceptional strength and contemporary styling. Featuring a static load capacity of 3,500 pounds, the 10 Series is Emcor’s sturdiest product line. These enclosures draw their strength from 14-gauge, multi-formed... Read more »
100MHz to 40GHz, Digital, Solid-State Variable Attenuator
PMI Model No. DTA-100M40G-30-CD-1 PMI Model Number DTA-100M40G-30-CD-1 is a 5-Bit, digitally controlled 30dB PIN diode attenuator with a step resolution of 1dB covering the frequency range of 100MHz to 40GHz. This model operates on +5VDC and only draws 40mA. Attenuation accuracy of 0.6dB is... Read more »
1094xB series
Large scale communication installations require State-of-the-Art equipment. The 1094xB series provides the systems professional with an uncompromising combination of high performance and high reliability switching elements coupled together for performance (DC-18GHz available). Standard redundant... Read more »
11DP-11R5 16R5-CD-SFF-1 Diplexer
PMI Model No. 11DP-11R5/16R5-CD-SFF-1 is a diplexer that offers passbands at 10.75 to 12.25GHz and 15.75 to 17.25GHz. The passband insertion loss is less than 3dB and the VSWR is 1.5:1 maximum. Filter channel 1 has a passband of 10.75 to 12.25GHz and offers -50dBc of rejection at 10.25GHz and... Read more »
11DP-11R5-16R5-CD-SFF Diplexer
PMI Model No. 11DP-11R5/16R5-CD-SFF is a diplexer that offers passbands at 10.75 to 12.25GHz and 15.75 to 17.25GHz. The passband insertion loss is less than 3dB and the VSWR is 1.5:1 maximum. Filter channel 1 has a passband of 10.75 to 12.25GHz and offers -50dBc of rejection at 10.25GHz and... Read more »
1203C RF Distribution Amplifier
Excellent price/performance distribution amplifier providing 12 low noise outputs from one input. Frequency range from 1kHz up to 50MHz, unity gain and very low additive phase. Read more »
1203-MC Broadband RF Distribution with Monitor & Control
The 1203C-MC is a Broadband RF Distribution with high performance distribution of frequency references, with full remote monitor and control interface. Read more »
1204A Digital Distribution Amplifier
Broadband distribution unit providing 12 outputs from one input. Frequency range <0.1 PPS to 30MHz. Ideal for distributing 1PPS, E1 clock, T1 clock, or any other digital pulse streamm within the frequency range. Standard output is 5V TTL/CMOS with options that include increased output level to 10V. Read more »
1204A-MC Digital Signal Distribution with Monitor and Control Interface
Building on the success of the 1204A Digital Distribution amplifier, the 1204A-MC is a flexible distribution platform suitable for various pulse formats enhanced with a full remote monitor and control interface. Read more »
1205A Time Code Distribution
The 1205A provides 12 IRIG B (am) time code outputs from one time code input. Also available is a "daisy chaining" capability that allows output expansion up to 120 outputs. Read more »
1206A & 1207A Configurable Distribution
The ptf 1206A (1U) & ptf 1207A (2U) provide the flexibility of distributing a variety of signals from one highly configurable box. With ptf’s quad-bloc distribution cards you can build a system that is tailored to your specific needs. Based on the ptf family of Distribution products, ptf quad-blocs... Read more »
1207A Auto Switch / Distribution
The ptf 1207A delivers up to eight channels of fully redundant, frequency and timing references to critical applications such as Satellite Communications, Broadcasting, WiMax and others, with NO SINGLE POINT OF FAILURE. Read more »
1208A/09A Optical Distribution
Designed for applications requiring distribution of RF signal within high electrical noise environments, or over long distances (up to 2kM) the VF 1208A optical transmitter and VF 1209A optical receiver provide conversion from copper to optical and back to copper outputs for multiple locations. Read more »
1226 Auto Switch / Distribution with Remote Monitor and Control
In addition to the auto switching capability, the new ptf 1226 delivers up to thirty six channels of RF, Digital or Time Code frequency and/or timing references to critical applications such as Satellite Communications, Broadcasting, WiMax and others. Read more »
1229A Frequency Generator/Phase Stepper
Utilizing direct digital synthesizer technology, the VF 1229A can provide any frequency in the range from DC up to 30MHz. Standard configuration provides two independent channels, and the unit has a reference input to provide the ultimate in both accuracy and precision. Frequncies are settable in... Read more »
1603A Broadband RF Distribution Amplifier with Remote M/C
Building on the success of the 1203C Broadband RF Distribution amplifier, the 1603A provides additional high performance frequency outputs, enhanced this with a full remote monitor and control interface for up to (16) outputs. Read more »
1604A Digital Distribution Amplifier with Remote M/C
Building on the success of the 1204A Digital Distribution amplifier, the 1604A provides additional high performance digital outputs, and enhances this with a full remote monitor and control interface for up to 16 outputs. Read more »
17762/17763 X-Band Transmit/Reject Filter
The model 17762 X-Band transmit/reject filter achieves extremely low (receive) band loss in one of the most compact X-Band downlink filters available in the industry. The model 17763 X-Band receive/reject filter also utilizes hybrid design techniques, achieving low (transmit) band loss. Read more »
2.0 to 18.0GHz, I/Q Vector Modulator PMI Model No. PIQ-2G18G-360-16-CD-1
PMI Model No. PIQ-2G18G-360-16-CD-1 is a 2.0 to 18.0GHz, high performance I/Q Vector Modulator with 2 x 12 bit monotonic TTL compatible channels (I and Q). This model offers a full 360 degrees of phase shift with a minimum of 16dB of amplitude control. Read more »
2.3 – 2.8 GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier
Skyworks introduces a 2.3 – 2.8 gigahertz, two stage, high linearity and high gain (32 dB) low noise amplifier that offers very low noise figure (0.85 db) and excellent return loss (15 db) in a small 4 mm square quad flat, no lead package. The on-die active bias design ensures consistent... Read more »
2.4GHz to 2.5GHz, Digital, Solid-State Phase Shifter
PMI Model No. PS-360-2D4G2D5G-10-CD-SFF PMI Model Number PS-360-2D4G2D5G-10-CD-SFF is a 2.4GHz to 2.5GHz, 10-Bit digitally controlled phase shifter that offers up to 360 degrees of phase shift range. This model has a LSB of 0.36 degrees and a low insertion loss of 4.0dB typically. This unit... Read more »
2.4mm
2.4mm connectors are 50 ohm precision connectors designed to perform mode free to 50GHz. The outer conductor measures 2.4mm and the robust wall of the connector body is designed to engage before the center conductor, assuring a rugged, repeatable mating interface. The interface is air dielectric... Read more »
2.92mm
2.92mm connectors are 50 ohm precision connectors designed to perform mode free to 45GHz. The outer conductor measures 2.92mm with a strong outer body wall compared to dielectric loaded interfaces of comparable size. The interface dielectric is air with the center conductor supported by a short... Read more »
20-920-4200-00
SMA plug to SMA plug right angle Read more »
20-921-4200-00
SMA plug to SMA jack SupeRites right angle Read more »
21-921-4200-00
SMA jack to SMA jack SupeRites right angle Read more »
26.5 to 40.0GHz High Pass Filter
PMI Model HP-26D5G-40G-CD-292FF is a suspended substrate, high pass filter that has a passband of 26.5 to 40.0GHz. This model offers less than 2dB insertion loss while offering over 54dB of rejection at 20GHz and below. This model is supplied in an ultra-small housing that measures only 0.65" x... Read more »
27 GHz Wideband Downconverters & Signal Recording Systems
Wideband downconverters with Signatec/GaGe High Speed Digitizers, allow for complete real-time signal recording and analysis systems covering frequencies up to 27 GHz. Featuring breakthrough frequency and bandwidth coverage for their size and cost, these downconverters are available with 3... Read more »
2SFB-8G26G-CD-SFF Rev C 2 Channel Switch Filter Bank
PMI Model No. 2SFB-8G26G-CD-SFF Rev C is a 2 channel switch filter bank providing a low-pass filter that passes 8.62 to 8.70GHz with a rejection band of 17.24 to 17.4GHz. In by-pass mode the unit passes signals from 8.0GHz to 26.5GHz. This unit is powered by a +5V single supply and the control... Read more »
3.5mm
3.5mm connectors are 50 ohm precision connectors designed to perform mode free to 34GHz. The outer conductor measures 3.5mm and the connector body wall is more robust than standard SMA connectors. The interface is air dielectric with the contact supported by a short dielectric bead. 3.5mm... Read more »
3115-1 Straight Female P.C. Mount
SMA straight female P.C. Mount Read more »
3203A GPS Receiver
Precision frequency reference for satellite communications, DVB/DAB, Laboratory References, or any application requiring a highly accurate and stable frequency reference. Unit provides low phase noise options (<-125dBc @ 10Hz), optional multi frequency outputs including 10MHz, 5MHz, 1MHz sine,... Read more »
3207A GlobalTyme2 Advanced GPS/GNSS Receiver
The ptf 3207A GlobalTyme2 GPS Receiver introduces a new level of advanced capability from a second generation, based on the highly successful ptf 3203A and ptf 3204A GlobalTyme receivers. With it's extraordinary stability and highly flexible approach, this unit provides numerous input source... Read more »
3223A Time Server
GPS disciplined network time server (NTP server) providing precision 1PPS, and IRIG B(am) time code outputs in addition to NTP, TIME, and DAYTIME protocols. Includes remote monitor and control interface (RS232 and Ethernet)with Telnet, SNMP, and http: (web browser). Read more »
32-channel L1/L2 GPS/GNSS Simulator
Spectracom's GSG-62 offers multiple frequency band operation, multiple GNSS constellation simulation, and expansion to more channels. GSG-62 is future-upgradeable to more frequency bands and channels (plug-in hardware) and more signal formats (firmware). Configure scenarios on-the-fly without... Read more »
