Converters
Down and Up-converters. Read more »
Converters and Receivers
Rodelco Electronics has designed and delivered custom Converters and Receivers for the Military and Aerospace marketplace. We have designed Converters and Receivers to the most stringent military screening and reliability requirements which incorporate: Low Noise Amplifiers Image Reject and... Read more »
CoorsTek Technical Ceramics
CoorsTek is the largest technical ceramics manufacturer in the world. We serve virtually every segment of the global economy with engineered material solutions including ceramics, high-performance plastics, and specialty metals. Read more »
COTS power modules
Martek Power is a leader in providing Military & Aerospace Grade Commercial Off-the-Shelf (COTS) power conversion solutions. Our development and manufacturing facilities for these linear and switching rugged power supplies located in Torrance, California, USA (50,000 square foot) and in Lyon,... Read more »
COUPLER- CABLE PROVIDES DESIGN FLEXIBILITY
Devens, MA - Response Microwave, Inc. a global specialist in providing RF/Microwave customer solutions, is pleased to announce the availability of its new drop-in or connectorized hybrid couplers suitable for use as a directional coupler or 90º quadrature hybrid. The new RMCL series offers... Read more »
Couplers
Wide bandwidth Low loss High power (40 to 50 W) Conventional and Synstrip technology Read more »
Crimp Kits
Our high-quality crimping sets are ideal for low-volume connector assembly. All of the kits include the crimp frame, cable cutter and stripper, and a custom padded hard case. Read more »
Cryogenic Products
Master Bond Inc. offers a wide range of versatile, high performance epoxy formulations designed to withstand the severe conditions found in cryogenic environments. They are available as one or two part systems, requiring either ambient or elevated temperature cures as specified below. When fully... Read more »
Cryogenically Cooled Thermal Platforms (LN2 or LCO2)
The T650 family of hot plates was designed to provide an affordable yet reliable approach to conductive thermal testing. They not only offer the lowest purchase cost, but the high quality construction assures the lowest cost of ownership. These hot plates are the quickest and most economical... Read more »
Crystal Filter - Monolithic Crystal Filters (MCFs)
Monolithic Crystal Filters (MCFs) are small, lightweight and exhibit excellent group delay characteristics, by using low impedance fundamental frequencies. VTC offers all standard frequencies of 10.7, 21.4, 45.0MHz in all the common bandwidth configurations. Read more »
Crystal Filters
NIC’s success was built on our Crystal Filter capabilities. We manufacture our own filter crystals for the finest in precision and reliable performance. Given the unique design requirements for crystal filters we use well established design and manufacturing techniques which are supported by the... Read more »
Crystal Filters
Crystal bandpass filters use the piezoelectric effect of quartz crystals and convert mechanical motion into electric signals. The low thermal expansion of quartz crystals allows crystal filters to produce stable performance over a wide temperature range. This type of crystal pass band filters exhibit... Read more »
Crystal Oscillators
NIC’s Crystal Oscillator product line is designed for a variety of applications that need high performance in both environmentally benign and rugged conditions. NIC manufactures TCXOs & VCTCXOs which typically employ a thermistor network to generate a correction voltage which reduces the frequency... Read more »
Crystal Resonator
VTC's crystal resonators will meet your kind of demands including wider frequency and operating temperature range, higher and more stable frequency stability, industrial standard thru-hole and ceramic surface mount packages. We can also design and produce specific products upon customer's... Read more »
Crystals
Ascend Frequency Devices offers a wide variety of crystal products, including all the industry standard packages, thru-hole or surface mount. This enables our products to be used in most all applications. Our precision engineering capabilities enable us to offer specifications that exceed typical... Read more »
Crystals Oscillators
See Web Page for Thru Hole and SMD Sizes available. Read more »
CSLLP1-100
CSLLP1-100 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-100 MHz. It offers Passband insertion loss of 0.8 dB Typ. and Stopband rejection of 80 dB Typ. up to 3000 MHz. This filter precisely-designed to offers low Passband insertion... Read more »
CSLLP1-1000
CSLLP1-1000 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-1000 MHz. This filter precisely-designed to offers low Passband insertion loss and excellent Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-1250
CSLLP1-1250 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-1250 MHz. This filter precisely-designed to offers low Passband insertion loss and excellent Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-200
CSLLP1-200 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-200 MHz. This filter precisely-designed to offers low Passband insertion loss and excellent Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-300
CSLLP1-300 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-300 MHz. This filter precisely-designed to offers low Passband insertion loss and good Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-400
CSLLP1-400 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-400 MHz. This filter precisely-designed to offers low Passband insertion loss and excellent Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-50
CSLLP1-50 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-50 MHz. It offers Passband insertion loss of 0.9 dB Typ. and Stopband rejection of 70 dB Typ. up to 3000 MHz. This filter precisely-designed to offers low Passband insertion loss... Read more »
CSLLP1-500
CSLLP1-500 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-500 MHz. This filter precisely-designed to offers low Passband insertion loss and good Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-700
CSLLP1-700 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-700 MHz. This filter precisely-designed to offers low Passband insertion loss and excellent Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSLLP1-850
CSLLP1-850 is a high-performance lumped-element Lowpass filter designed for RF and communication systems operating at DC-850 MHz. This filter precisely-designed to offers low Passband insertion loss and good Return loss characteristics in a compact size. It also offers wider Stopband... Read more »
CSSLP1-10000
CSSLP1-10000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–10 GHz range. It offers Passband insertion loss of 0.8 dB Typ. and Stopband rejection of 70 dB Typ. up to 25 GHz and excellent Return loss of 16 dB Typ. In... Read more »
CSSLP1-12000
CSSLP1-12000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–12 GHz range. It offers Passband insertion loss of 1 dB Typ. and Stopband rejection of 70 dB Typ. up to 25 GHz and excellent Return loss of 18 dB Typ. In... Read more »
CSSLP1-14000
CSSLP1-14000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–14 GHz range. It offers Passband insertion loss of 1.2 dB Typ. and Stopband rejection of 70 dB Typ. up to 25 GHz and excellent Return loss of 17 dB Typ. In... Read more »
CSSLP1-16000
CSSLP1-16000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–16 GHz range. It offers Passband insertion loss of 1.5 dB Typ. and Stopband rejection of 70 dB Typ. up to 25 GHz and Return loss of 11 dB Typ. In addition,... Read more »
CSSLP1-18000
CSSLP1-18000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–18 GHz range. It offers Passband insertion loss of 1.6 dB Typ. and Stopband rejection of 65 dB Typ. up to 25 GHz and Return loss of 10 dB Typ. In addition,... Read more »
CSSLP1-4000
CSSLP1-4000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–4 GHz range. It offers Passband insertion loss of 0.8 dB Typ. and Stopband rejection of 80 dB Typ. up to 25 GHz and excellent Return loss of 20 dB Typ. In... Read more »
CSSLP1-6000
CSSLP1-6000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–6 GHz range. It offers Passband insertion loss of 0.8 dB Typ. and Stopband rejection of 80 dB Typ. up to 25 GHz and excellent Return loss of 20 dB Typ. In... Read more »
CSSLP1-8000
CSSLP1-8000 is a state-of-the-art Suspended Substrate Stripline Lowpass Filter designed for RF and communication systems operating in the DC–8 GHz range. It offers Passband insertion loss of 0.7 dB Typ. and Stopband rejection of 70 dB Typ. up to 25 GHz and excellent Return loss of 21 dB Typ. In... Read more »
CST BOARDCHECK
CST BOARDCHECK™ (CST BC) checks PCB designs against a suite of EMC or SI rules. It reads popular board files from Cadence, Mentor Graphics, and Zuken as well as ODB++ (e.g. Altium). The kernel used by CST BC is the well-known software tool EMSAT. The user can select nets and components that are... Read more »
CST CABLE STUDIO
CST CABLE STUDIO® (CST CS) is dedicated to the three-dimensional analysis of signal integrity (SI), conducted emission (CE), radiated emission (RE), and electromagnetic susceptibility (EMS) of complex cable structures in electrically large systems. It provides powerful import filters from popular... Read more »
CST DESIGN STUDIO
CST DESIGN STUDIO™ (CST DS) is a powerful and easy-to-use schematic design tool that radically speeds up the analysis, synthesis and optimization of complex structures and electromagnetic systems. CST DS enables the synthesis of complex systems from simulation blocks. These blocks may represent... Read more »
CST EM STUDIO
CST EM STUDIO® (CST EMS) is dedicated to the simulation of static and low-frequency devices. Embedded in the same user-friendly CST design environment, CST EMS features a variety of solver modules to tackle electrostatics, magnetostatics, current flow, low frequency and even stationary temperature... Read more »
CST MICROWAVE STUDIO
CST MICROWAVE STUDIO® (CST MWS) is a specialist tool for the 3D EM simulation of high frequency components. The unparalleled performance of CST MWS makes it the first choice for leading research and development departments. CST MWS enables the fast and accurate analysis of high frequency devices... Read more »
CST MPHYSICS STUDIO
CST MPHYSICS STUDIO® (CST MPS) is a powerful and easy-to-use tool for thermal and mechanical stress analysis. Systems and devices very rarely fall neatly into just one area of physics, and multiphysics simulation is often necessary for a complete simulation of a device’s... Read more »
CST PARTICLE STUDIO
CST PARTICLE STUDIO® (CST PS) is a specialist tool for the fast and accurate analysis of charged particle dynamics in 3D electromagnetic fields. Powerful and versatile, it is suitable for tasks ranging from designing magnetrons and tuning electron tubes to modeling particle sources and accelerator... Read more »
CST PCB STUDIO
CST PCB STUDIO (CST PCBS) is a specialist tool for signal integrity (SI), power integrity (PI), and electromagnetic compatibility (EMC) analysis on printed circuit boards (PCB). It integrates easily into your design flow by providing powerful import filters for popular EDA tools from Cadence,... Read more »
CST STUDIO SUITE
CST STUDIO SUITE is the culmination of many years of research and development into the most accurate and efficient computational solutions for electromagnetic designs. From static to optical, and from the nanoscale to the electrically large, CST STUDIO SUITE includes tools for the design,... Read more »
CSZ Vibration Testing
Our Test Laboratory offers a variety of shock and vibration testing services for testing a wide range of products across many industries. Automotive components are tested to simulate the effect of road conditions. Other products may be exposed to vibration during transportation until they reach... Read more »
CT Sries
This stylish 1/2-wave omnidirectional antenna features an internal counterpoise which eliminates external ground plane dependence and maximizes performance. A wide bandwidth and low VSWR make the CT antenna an excellent choice for any application requiring an affordable, cosmetically attractive,... Read more »
CURL 1-Wire Push-To-Talk Earpiece
The Power of comfort. C-Ring Earloop. Left or Right Ear. Speaker rests on ear for all-day comfort. In-line Microphone with PTT. Read more »
Current Transformers
Current transformers (CTs) are used for measurement of electric currents and can be known as instrument transformers. When current in a circuit is too high to directly apply to measuring instruments, a current transformer produces a reduced current accurately proportional to the current in the... Read more »
Custom Antennas
Our antenna portfolio includes a wide range of antenna topologies like patch antennas, choke rings, helical structures and antenna arrays. We have designed and built antennas in the 0.5 to 25 GHz frequency range. We use our extensive library of antenna designs to create custom versions. Read more »
Custom Cable Assy
Use our handy cable select form to request a quote for a custom cable assembly. Read more »
Custom Coils
Emicon Corporation specializes in manufacturing custom coils. We make both Air Wound and Toroidal coils. Using our part numbering system you can specify just what you need. We also make wound antennas. Read more »
