Silicon
Formula: Si CAS Number: 7440-21-3 Read more »
Silicon Carbide
Formula: SiC CAS Number: 409-21-2 Read more »
Silicon monoxide
Formula: SiO CAS Number: 10097-28-6 Evaporation Material, High Purity Read more »
Single Fiber Fusion Splicer
The Fujikura 70S is a fully ruggedized, core alignment fusion splicer, providing consistent, low loss, splice performance. The new design streamlines the steps required to complete splices, resulting in greater productivity. Configurable automation features allow you to customize the operation of... Read more »
Single Row Terminal Blocks
32500 Series .325" (8.25mm) Open or Tri-Barrier - 300V, 15 Amp rating (20A with 12AWG & Lugs) - Molded-in standoffs - Open or Tri-Barrier designs - Base mount, PC pin, wire wrap, turret, and right angle terminals - Wire Clamps - UL/CSA approved 37000/38000 Series 3/8" (9.52mm) Open or... Read more »
Single-channel fiber optic rotary joints (R series)
The R series Single-channel (SM or MM) rotary joints are the most versatile designs the market has ever seen. The rugged body allows fiber pigtail, ST, or FC receptacles on either the rotor side or the stator side. One can configure the package to fit his need exactly. The standard base models are... Read more »
Single-Pole-Double-Throw (SPDT)
This type of switch has three ports: one port in the center often referred to as the common and two output ports on either side of the common. The switch positions are selectable by a single actuation to connect the common and either output port. It is always connected to one or the other output... Read more »
Single-Pole-Multi-Throw (SPMT) SP3T-SP6T
This type of coaxial RF / Microwave switch has a common input port and up to six (6) individually selectable output paths. These coaxial switches are available with Normally Open or Latching actuators and with or without internal terminations. We offer a wide selection of models that features... Read more »
Single-Pole-Multi-Throw (SPMT) SP7T-SP8T
This type of coaxial RF / Microwave switch has a common input port and, for this model series, up to eight (8) individually selectable output paths. These coaxial switches are available with Normally Open or Latching actuators with or without internal terminations. We offer a wide selection of... Read more »
Skyworks Amplifiers
Skyworks Solutions is pleased to offer a broad selection of Power Amplifiers (PAs) and Low Noise Amplifiers (LNAs) for cellular applications and diverse markets such as wireless infrastructure, WLAN, automotive, test & measurement, energy management and other high performance microwave... Read more »
Skyworks Amplifiers for Smart Energy, Connected Home and Automation
Skyworks Solutions is pleased to offer a broad selection of Power Amplifiers (PAs) and Low Noise Amplifiers (LNAs) for cellular applications and diverse markets such as wireless infrastructure, WLAN, automotive, test & measurement, energy management and other high performance microwave... Read more »
Skyworks Attenuators
Skyworks Solutions is pleased to offer a broad selection of GaAs digital attenuators, PIN diode voltage variable attenuators, and silicon fixed attenuator pads for infrastructure, test & measurement, and other high performance microwave applications up to 40 GHz. These product solutions leverage... Read more »
Skyworks BDS/GNSS/GPS Front-end Modules
Designed with cost and space savings in mind, Skyworks Front-End Modules combine the company's industry-leading power amplifier (PA), low noise amplifiers (LNA) and switch functions into single low-cost, laminate-based multi-chip modules (MCM). Key features of the transmit FEMs include multi-band /... Read more »
Skyworks BDS/GPS/GNSS Power Amplifiers
Skyworks Solutions is pleased to offer a broad selection of Power Amplifiers (PAs) and Low Noise Amplifiers (LNAs) for cellular applications and diverse markets such as wireless infrastructure, WLAN, automotive, test & measurement, energy management and other high performance microwave... Read more »
Skyworks Limiter Modules
Skyworks' limiter modules are used in a variety of wireless communications and aerospace and defense applications. A limiter prevents overload by allowing RF signals below a certain threshold to pass through, but larger signals exceeding the threshold become increasingly attenuated. A typical... Read more »
Skyworks Low Noise Amplifiers and Discretes
Skyworks Solutions offers Low Noise Amplifier (LNA) products meeting the needs of cellular infrastructure, WLAN, WiMAX, ISM, and all applications requiring low noise amplifiers from DC to 6 GHz. Skyworks offers MMIC products in Enhancement Mode (E Mode LNA) and Depletion Mode (D Mode LNA) pHEMT... Read more »
Skyworks PIN Diodes
Skyworks offers PIN, limiter, Schottky, and varactor diodes for a wide variety of microwave applications including WLAN, infrastructure, handset, Satcom (LNB/DBS-CATV), automotive, military, aerospace and defense, test & measurement, metering, medical, and RFID. Our discrete silicon semiconductor... Read more »
Skyworks Schottky Diodes
Building on a proven legacy (including products developed at Alpha Industries prior to its merger with Conexant), our diode product offering includes PIN, Schottky, varactor and limiter diodes for a wide variety of microwave applications including WLAN, infrastructure, handset, SatCom... Read more »
Skyworks Switches
Skyworks Solutions is pleased to offer a broad selection of GaAs switches for diverse markets such as WLAN, handset, wireless infrastructure, SatCom (LNB/DBS–CATV), automotive, test & measurement, energy management, and other microwave applications. Skyworks switches are available in many different... Read more »
Skyworks Technical Ceramics
Skyworks Solutions, through Trans-Tech, its industry-leading ceramic products division, designs and manufactures a complete line of RF and microwave components for commercial markets. With over 50 years of experience, we offer a complete line of high quality, low-cost ceramic-based components for a... Read more »
Skyworks Varactor Diodes
Skyworks offers PIN, limiter, Schottky, and varactor diodes for a wide variety of microwave applications including WLAN, infrastructure, handset, Satcom (LNB/DBS-CATV), automotive, military, aerospace and defense, test & measurement, metering, medical, and RFID. Our discrete silicon semiconductor... Read more »
Skyworks WiFi Connectivity Front-end Modules
Designed with cost and space savings in mind, Skyworks Front-End Modules combine the company's industry-leading power amplifier (PA), low noise amplifiers (LNA) and switch functions into single low-cost, laminate-based multi-chip modules (MCM). Key features of the transmit FEMs include multi-band /... Read more »
SLFS / SLS Series
SLFS / SLS Series Multi-Purpose Synthesizers PRODUCT FEATURES • Fixed-frequency or serially-programmable GENERAL CHARACTERISTICS • Frequency: 50 MHz - 12 GHz • Bandwidth: Fixed, to > 30% • Phase Noise (Fout=2 GHz): <-100 dBc/Hz @ 10 KHz • Supply Voltage: +5, +8, or +12 VDC •... Read more »
SLPT Series - NMO and Direct Mount
Pulse/Larsen is proud to introduce the SLPT (Shadow Low Profile Transit) product line for Public Safety, WLAN, LTE and 3G/4G applications. These rugged, aesthetically pleasing antennas provide a smaller, slimmer option to our current LPT product line without sacrificing mechanical or electrical... Read more »
SLX Series
Ultra miniature frequency synthesizer, 0.5" x 0.5" x 0.15" (12.7 x 12.7 x 3.8)mm. Fixed or serially programmable. Output buffer. Phase noise (Fout = 290 MHz) <-100 dBc/Hz @ 10 KHz. Available up to 6 GHz. SLX Series Ultra-Miniature, Low Power Consumption PRODUCT FEATURES • Fixed-frequency... Read more »
SM2600D, SM600D & SM202 Antennas
This multi-band, multi-port transport antenna platform is designed to provide the full access to multiple wireless networks simultaneously. They feature a low profile and unobtrusive black housing that is perfect for mounting to a typical metal vehicle rooftop with minimal visual impact. It can be... Read more »
SM300, SM600 & SM700
The compact and low profile broadband SM300, SM600 and SM700 are ideal for vehicle roof-top mounting, covers all the bands for 2G, 2.5G, 3G and 4G cellular, LTE 700 MHz and LTE 2600 MHz, as well as ISM, GPS, WLAN, and broadband internet access. The SM300 covers additional UHF bands for TETRA, NMT... Read more »
SMA
Molex offers a wide range of SMA coaxial connectors in various materials and performance levels. Some SMA designs operate up to 27 GHz, including our compression mounted SMA Jack test connector. Read more »
SMA
SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is capable of operating mode free up to 24 Ghz. Extended frequency versions are also available with performance to 26.5GHz. SMA connectors are one of the... Read more »
SMA / FAKRA SMB Adapter
BroadWave Technologies has developed a new SMA female to FAKRA SMB male adapter that easily mates to FAKRA SMB female connectors. Model 412-491-315 flawlessly interconnects within the embedded plastic housing of standard FAKRA connectors. This unit operates DC-4 GHz, has VSWR < 1.2:1 and insertion... Read more »
SMA Connectors
SMA connectors are popular and cost-effective devices which provide repeatable electrical performance from DC to 12.4GHz. SMA connectors are available in a broad variety of mounting styles, brass and stainless steel body types, and assorted cable attachment methods. Read more »
SMA Female .034 S/R Pigtail
Improve RF and Microwave bread boarding circuit consistency by using coaxial semi-rigid, pigtail cable assemblies with SMA female connectors. Perfect for engineers designing and testing RF and Microwave circuits to 6GHz including: antenna design, PCB circuit isolation, component evaluation on... Read more »
SMA Female to 7/16 Male adapters
P/N.: A-716M-SMAF-015 Impedance: 50 Ω Product Series: Adapter > Between Series Body Plating: Albaloy plated Body Style: Straight Connector Material: Brass Contact Plating: Gold Read more »
SMA Hermetic Adapter
SMA Female to Female Bulkhead Hermetically Sealed Jack to Jack Adapter. 50 Ohm, DC-18 GHz, Passivated Stainless Steel Read more »
SMA Male to Female Radius 18 Ghz Adapter
SMA Male to Female Radius Swept Coaxial Adapter. DC-18 GHz with a VSWR of 1.20:1. Material is Gold Plated Stainless Steel. Read more »
SMA Right Angle Bulkhead Female for PCB
/N.: 60-12-5B2-073 Impedance: 50 Ω Product Series: SMA connectors Body Plating: Gold Body Style: Right Angle Connector Material: Brass Contact Plating: Gold Gender: Female Frquency: DC-6GHz Read more »
SMA Series
SMA Series connector is a semi precision subminiature version "A" that provide repeatable electrical performance from DC - 12.4 GHZ with flexible cable. Semi Rigid cabling extends the frequency range of of the device to 18 Ghz. These devise offer broadband performance and constant 50 ohm... Read more »
SMA Straight Male Solder for RG405/Semi-rigid .086 cable Connectors
P/N.: 60-03-2M11-002 Impedance: 50 Ω Product Series: SMA connectors Body Plating: Gold Body Style: Straight Connector Material: Brass Contact Plating: Gold Gender: Male Frequency: DC-18GHz Read more »
SMA Subminiature Connectors
SMA is an acronym for SubMiniature version A and was developed in the 1960's. It's compact design, high durability and outstanding electrical performance have made it one of the most widely used connectors in RF and Microwave applications. Normally utilized in frequency ranges from DC-18 GHz, there... Read more »
SMD Horizontal Tunable Coil
6YN-XX Series of SMD Horizontal Tunable HI-Q RF coils designed to use in single and multiple LC filters. These parts operate within a frequency range from 25 MHz to 1 GHz. This family of parts is offered in values ranging from: 17 nH to 385 nH and their SRF exceeds 1 GHz. Parts were developed using... Read more »
SMD Test Solution
SMD Test Solution is a comprehensive product utilizing a vector network analyzer (sold separately), fixtures, software, and manual, non-destructive characterization of 0402 RLC components. It allows for measurement of SMD components over a wide frequency range from 100 kHz to 20 GHz – an industry... Read more »
SMP
The SMP connector is available in a range of styles incuding cable mount, PCB mount and adapters. SMP operates up to 40 GHz and can be used for board-to-board applications. Read more »
SMP Blind-mate Connectors
The new Anoison SMP BLIND-MATE CONNECTOR offer customers a low cost alternative for those applications where the small size of an SMP is desired. They are available in both through hole and surface mount configurations and smooth bore or limited bore interfaces. Anoison SMP micro-miniature... Read more »
SMP Connectors
Board-to-Board connectors provide a valued role in reducing the size and cost of connections while providing critical electrical and mechanical performance. Phoenix offers a line of SMP and microminiature SMPM connectors with performance to 26.5 GHz. These products are available in standard and... Read more »
SMP Plug Smooth Bore 2Hole Flange connector
Our SMP Plug Smooth Bore 2Hole Flange connector is Ideal for High-Frequency and High-Cycle application and has the following features. · High-Frequency Performance: Suitable for frequencies up to 40 GHz, ideal for aerospace, defense, and telecoms. (26.5GHz, 18GHz also available) · Easy... Read more »
SMP-MAX
The SMP-MAX is designed for board-to-board applications up to 6GHz and offers the industries best combination of electrical performance and mis-alignment characteristics. SMP-MAX can tolerate 2mm axial and 3 degree radial mis-alignment and a VSWR of 1.2:1 maximum up to 3 GHz. Molex is licensed by... Read more »
Sodium Chloride
Formula: NaCl CAS Number: 7647-14-5 Read more »
SOLDERLESS COAX CONNECTOR SYSTEM SPEEDS BUILD TIME
Devens, MA - Response Microwave, Inc. a global specialist in providing RF/Microwave customer solutions, is pleased to announce the availability of a new patented 1.0/2.3 solderless cable connector series targeted at emerging high bandwidth Datacom/telecom central office applications. Part of... Read more »
Solderless Right-Angle QMA Connector
Solderless Right-Angle QMA Connector Reduces Installation Time Traditional right-angle connectors require soldering the center conductor, which increases the difficulty of field installation and time required. RF Connectors division of RF Industries produces a solderless right-angle QMA... Read more »
Solderless, 2-piece N Connectors
Improved Environmental Performance for Solderless N Connector The majority of N type connectors are installed at remote sites exposed to the environment. The RF Connectors Division of RF Industries offers an improved N male connector for high performance .400 inch diameter cables. Part number... Read more »
