PEAFS3-12-218-15-SFF-1 Low Noise Amplifier
PMI Model No. PEAFS3-12-218-15-SFF-1 is a 2.0 to 18.0GHz low noise amplifier that provides +15 to +22dB of gain. The noise figure is 5.0dB max from 2.0 to 4GHz and 4.1dB max at 4.0 to 18.0GHz and offers an OP1dB of +9dBm min. The operating voltage is +15VDC and the current draw is 180mA max.... Read more »
PEC-1227-1575-IAFS-SFF Integrated Module
PMI Model Number PEC-1227/1575-IAFS-SFF which is a multi-function, integrated module that provides amplification and dual passband filtering within the GPS L1 & L2 frequency bands of 1575.42MHz and 1227.60MHz. Two input channels are switchable to a common output. This product is designed to handle... Read more »
PEC-14-127-8-12-SFF Rev B Wide Band Front End Amplifier
PMI Model No. PEC-14-127-8-12-SFF Rev B is a wide band front end amplifier that operates over the frequency range of 1.0 to 26.5GHz. This model provides gain of 13dBm to 17dBm and has a maximum gain flatness of +/-1.5dB. The maximum noise figure is 5.5dB from 1.0 to 20.0GHZ and 6.0dB from 20.0 to... Read more »
PEC-14-127-8-12-SFF-1 Ultra-broadband Amplifier
PMI Model No. PEC-14-127-8-12-SFF-1 is an ultra-broadband amplifier that operates over the frequency range of 1.0 to 26.5GHz. This model provides gain of 13 to 17dB and has a maximum gain flatness of ±1.5dB. The maximum noise figure is 5.5dB from 1.0 to 20.0GHZ and 6.0dB from 20.0 to 26.5GHz. This... Read more »
PEC2-60-4G8G-1R75-14-12-SFF Low Noise Amplifier
PMI Model No. PEC2-60-4G8G-1R75-14-12-SFF is a 4.0GHz to 8.0GHz low noise amplifier that typically provides 60dB of gain. The gain flatness is ±1.25dB maximum with a noise figure is 1.75dB maximum. This amplifier provides a minimum OP1dB of +14dBm. The VSWR is 2.0:1 maximum into 50 ohms impedance... Read more »
PEC2-8G18G-21DBM-LM-SFF Limiting Amplifier
PMI Model No. PEC2-8G18G-21DBM-LM-SFF is an 8.0 to 18.0GHz limiting amplifier that provides an nominal output power level of +20.0dBm for an input power range of -50 to +10dBm CW. This model has output power level versus frequency range compensation such that the limited output power has a flat... Read more »
PEC3-33-218-20-15-SFF-HS-E Low Noise Amplifier
PMI Model No. PEC3-33-218-20-15-SFF-HS-E is a 2.0 to 18.0GHz Low Noise Amplifier that provides greater than 33dB of gain while maintaining a maximum gain flatness of ±2.0dB maximum over the operating frequency. The noise figure is 4dB typical and offers an OP1dB of +20dBm minimum and an OIP3 of... Read more »
PEC3-40-30M26R5G-6R0-12-12-SFF Low Noise Amplifier
PMI Model No. PEC3-40-30M26R5G-6R0-12-12-SFF is a 30MHz to 26.5GHz Low Noise Amplifier that provides greater than 35dB of gain while maintaining a maximum gain flatness of ±3.5dB maximum over the operating frequency. The noise figure is 6.0dB typical and offers an OP1dB of +12dBm minimum. The... Read more »
PEC-37-9G10G-3R0-27-SFF Low Noise Amplifier
PMI Model No. PEC-37-9G10G-3R0-27-SFF is a Low Noise Amplifier that operates over the 9.0 to 10.0GHz frequency range. This model provides 28dB of gain and offers a low noise figure of 3.0dB maximum. The amplifier provides an OP1dB is +27dBm minimum and operates on +10 to +15VDC with 400mA of... Read more »
PEC-38-30M18G-12-SFF Low Noise Amplifier
PMI Amplifier Model PEC-38-30M18G-12-SFF is a broadband, low noise amplifier that operates over the 30MHz to 18GHz frequency range. This model provides 38dB of gain and has a gain flatness of ±2.0dB maximum. The noise figure is 5dB maximum and the OP1dB is +12dBm minimum. This amplifier maintains a... Read more »
PEC-42-1G40G-20-12-292FF Ultra-Wideband Low Noise Amplifier
PMI Model No. PEC-42-1G40G-20-12-292FF is a 1.0 to 40GHz, Ultra-Wideband Low Noise Amplifier that provides 42dB of gain typically with a typical noise figure of 5.5dB. The OP1dB is typically +22dBm (1.0 to 18.0GHz) and +19dBm (18.0 to 40.0GHz).. The maximum input power rating is +17dBm CW and the... Read more »
PEC-42-500M40G-20-12-292MM Low Noise Amplifier
PMI Model No. PEC-42-500M40G-20-12-292MM is a 500MHz to 40GHz Ultra-Wideband Low Noise Amplifier that provides typically 42dB of gain with a noise figure of 5.5dB at 20GHz. The OP1dB is typically +22dBm (1.0 to 18.0GHz) and +19dBm (18.0 to 40.0GHz). The maximum input power rating is +17dBm CW and... Read more »
PEC-60-10K40M-3R5-14-12-SFF Low Noise Amplifier
PMI Model No. PEC-60-10K40M-3R5-14-12-SFF is a low noise amplifier that operates from 10kHz to 40MHz. This amplifier provides over 60dB of gain and offers a low noise figure of 3.5dB maximum. The output power at 1dB gain compression is +14dBm minimum. This amplifier operates from a single +12V or... Read more »
PEC-85-0R32R5-15LM-12-SFF Limiting Amplifier
PMI Model No. PEC-85-0R32R5-15LM-12-SFF is a limiting amplifier that operates over the frequency range of 300MHz to 2.5GHz. This model provides a gain of 85dB typically and a limited output of +15dBm ± 2.5dBm. The typical noise figure is 5dB and a maximum VSWR of 2.0:1 is maintained under all... Read more »
PECL & LVDS TCXO & VCTCXO
TCXO’s bridge the gap between oven compensated OCXO’s & non-compensated Crystal Oscillators for ADSL, SDH, SONET, ATM, 4G & many more applications using frequencies from 12.000MHz to 800.000MHz. Now they are available with either a PECL or LVDS Square Wave output. Read more »
Pendulum Microwave Frequency Counter/Analyzer
The CNT-90XL Microwave Frequency Counter/Analyzer is ideal for installation and maintenance of point to point microwave links, satellite communication equipment testing, YIG & VCO testing, RF frequency counter & microwave instrumentation calibration, testing or research. The CNT-90XL is the... Read more »
Permanent Magnet Oscillators (Low Input Power)
Permanent magnet technology delivers our lowest DC voltage (prime power) available and is offered in 2 to 44 GHz standard models and in high performance models up to 44 GHz using frequency doublers. Our surface mount MLSMO and MLOTF series and TO-8 MLTO oscillators are extremely small and offer... Read more »
Personal RF Safety Monitor
LBA's FieldSense 2.0™ personal RF safety monitors are an effective and economical means to monitor the strength of electromagnetic (RF) fields from wireless cell phone towers, microwave ovens, television stations, and other common workplace RF sources between 50 and 6000 MHz, E-field and H-field... Read more »
PFEM-9D4G-CD-1 Multi-Function Module
PMI Model No. PFEM-9D4G-CD-1 is a multi-function module that provides amplification, switching and filtering within the frequency band of 9410MHz. This module provides two input channels and is switchable to a common output. This model is designed to offer multiple gain level selection, high... Read more »
Pharmaceutical Data Loggers
MadgeTech’s pharmaceutical data loggers are precision instruments designed to monitor and record the manufacturing, shipping and storage of pharmaceuticals. The product line includes both standalone and wireless models for measuring temperature, humidity and pH. The devices are easy to use, simply... Read more »
Phase Master® flexible cable assemblies
Phase stable assemblies ideal for applications requiring flatter phase vs. temperature performance or improved phase tracking over temperature. Exceptional phase stability over temperature performance. Good phase stability with handling. Flexible, lightweight construction. Armoring options... Read more »
Phase Shifter Model PS-360-DC-3 OPTION 618-15D
PMI Model No. PS-360-DC-3 OPTION 618-15D is an 8-bit, digitally controlled phase shifter operating from the 6.0 to 18.0GHz. frequency range. This unit has a typical insertion loss of 10dB and a VWSR of 2.0:1 max. It is supplied with removable SMA(F) connectors in a housing measuring 1.6" x 1.75" x... Read more »
Phase Shifter Model PS-500M2G-8B-SFF
PMI Model No. PS-500M2G-8B-SFF is a stare-of-the-art, 8-Bit Digitally Controlled Phase Shifter that operates over the 500MHz to 2.0GHz frequency range. This model has a typical insertion loss of 10dB and offers 360 degrees of phase shift via 8-Bit TTL control. The phase shift error is less than ±10... Read more »
Phase Shifters
NIC manufactures custom Phase Shifters designed for high reliability environments. The assemblies consist of diverse components such as amplifiers, switches, filters, and MMIC devices. Each component is carefully designed and adapted to meet all custom specifications. NIC designs phase shifters to... Read more »
Phase Shifter's and Bi-Phase Modulators
PMI offers the highest quality phase shifter's and bi-phase modulator's for commercial and military applications in the frequency range of a few MHz to 40GHz. Features of Phase Shifter's: • 0 to 360 Degrees • Analog Controlled • Digital Controlled • Fast Speed • Low Insertion... Read more »
Phase3™ Ultra Low Loss - Series C
Series C cable is optimized for consistent and repeatable performance where the demand is minimum attenuation, high shielding effectiveness and low VSWR. Available with phase matching, armoring and in long lengths upon request. Read more »
Philips/NXP BLW-96 Replacement
Philips/NXP Replacement: 50V, 220 Watts, 30 MHz, Gain 13 dB. SOE-500 ceramic package. The HF50-220 utilizes Spectrum Devices’ Bipolar process which offers an improvement in collector-base breakdown voltage, enhancing reliability while maintaining RF performance. Read more »
Pi Filtered D-Sub Connectors
Customers worldwide rely on the Phoenix combination D-Subminiature connector to integrate coax, high power, high voltage, and signal into one, space-saving housing. In addition, custom designs can be engineered for your specific application to include filters, ground straps, special hardware, and... Read more »
PIA-10G-CD-1 Integrated Dielectric Resonator (DRO)
PMI Model No. PIA-10G-CD-1 is a 10GHz Integrated, Dielectric Resonator (DRO) Module with three outputs, each having a 0 to 360 degree analog controlled, variable phase shifter and 0 to 10dB analog controlled, variable output control capability on each of the outputs. This model provides a low... Read more »
PIA-12D8G-CD-1 Dielectric Resonator Oscillator
PMI Model No. PIA-12D8G-CD-1 is a Phase Locked, Dielectric Resonator Oscillator with Internal Reference having an output frequency of 12.8GHz. This model provides a minimum output of +13dBm with all spurs held to -80dBc and harmonics held to -25dBc. The frequency stability is ±3 ppm with an... Read more »
PILOT Control Software
An integral part of SemiProbe’s patented adaptive architecture, PILOT control software consists of a number of DLL-based functional modules linked through the SemiServer for communicating to and from the PS4L and other test equipment. Read more »
PIN Diode Attenuators
Frequency Range 2 to 18 GHz High Levels of Attenuation Low Insertion Loss Fast Switching Speeds Military Screening Options Available Rodelco's PIN diode attenuator product line has developed over the past twenty years to allow our customers the option to select their optimum component... Read more »
PIN Diode Attenuators
Paciwave provides minature PIN attenuators, both digitally and analog voltage or current controlled, in all the popular microwave bands to 40 GHz. Units exhibot excellent flatness and linearity, and are monotonic. Attenuators are available with attenuation ranges up to 120 dB, and with step size... Read more »
PIN Diode Switches
Broad Frequency Ranges for standard products 1 to 18 GHz Ultra Fast Switching Times Compact Size Hybrid, Microelectronic Construction Full Military Screening Options SPST to SP8T The introduction of high performance PIN diode switches at Rodelco more than 25 years ago has today... Read more »
PIN Diode Switches
Paciwave provides both low loss and high power solid state RF switches from 100 MHz through 40 GHz, in configurations from single-throw to 24-throw. Switches are available either absorptive or reflective. Switches come packaged in small industry-standard enclosures or custom enclosures. Coaxial... Read more »
PIQ-0R5G2G-360-20-CD-1 High Performance I/Q Vector Modulator
PMI Model No. PIQ-0R5G2G-360-20-CD-1 is a 0.5 to 2.0GHz, High Performance I/Q Vector Modulator with 2 x 12 bit monotonic TTL compatible channels (I and Q). This model offers a full 360 degrees of phase shift with a minimum of 20dB of amplitude control. Read more »
PkZ Blindmate Contacts
Phoenix is the proven leader in blind mate technology demonstrating successful performance through generations of global telecommunication systems. We deliver this technology through a broad range of RF and Microwave contacts from 800 MHz to 40 GHz offering variations in size, impedance,... Read more »
PLANAR 304/1 Vector Network Analyzer
PLANAR 304/1 is an S-parameter vector network analyzer designed for operation with an external PC. The interface is implemented in a virtual format: it connects to any Windows-capable machine via USB and delivers accurate testing and measurement through a platform that can keep up with constant... Read more »
PLANAR 804/1 Vector Network Analyzer
PLANAR 804/1 is an S-parameter vector network analyzer designed for operation with an external PC. The interface is implemented in a virtual format: it connects to any Windows-capable machine via USB and delivers accurate testing and measurement through a platform that can keep up with constant... Read more »
Planar 808/1 8 GHz Analyzer
The Planar 808/1 is an 8 GHz, full-size analyzer providing lab grade performance in a 19-inch chassis, including both 4-port configuration and direct receiver access. All devices are ATE compatible, rack mountable, and easy to program and share between multiple users. This full-size analyzer is... Read more »
Plastic Body Conduit Connectors & Fittings with plastic thread & metal thread
IBIS Electro-Products Corporation is a global leader in innovative and unique Flexaquick quick-connect plastic electrical conduit connectors and fittings. Our quick-connect / disconnect conduit fittings are specifically designed for use with both standard and the newly introduced multi layer... Read more »
Plastic Bonding Adhesive
Bond-IT 7050 Activated Epoxies adhere to most plastic surfaces producing bonds in many cases stronger than the plastic substrates. Easy to use. Just mix, apply and cure at room temp. for use from -45ºF to + 400ºF. Read more »
Plastic Corrugated Nylon & Spiral PVC Conduits
IBIS Electro-Products Corporation is a global supplier of Rohrflex innovative protective plastic conduits including flexible multilayer corrugated nylon, AIRflex spiral PVC, and spiral PU blue polyurethane varieties. Ideally suited for wiring and cabling applications involving machine automation,... Read more »
Plate - Special Purpose Metals and Alloys
If you need specialty metals or alloys plate for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of plate products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut back on your... Read more »
Plenum-rated, LTE-ready antennas for In-building applications feature premium PIM-rating
New plenum-rated Omni-directional antennas can be concealed for improved aesthetics while meeting stringent building codes RFS introduces its I-ATO3-698/2700 Series of plenum-rated, PIM-certified omni-directional antennas. The RFS portfolio of omni-directional antennas is designed for broadband... Read more »
PLXO Series
Phase-locked crystal oscillator. Connectorized or surface-mount package. Optional internal reference (connectorized version). New - smaller package (SMT 0.9 x 0.9 x 0.15 in). Excellent phase noise (Fout = 120 MHz) <-135 dBc/Hz @ 1 KHz. PRODUCT FEATURES • Connectorized or surface-mount... Read more »
PM2-34-218-15-SFF-1 Low Noise Amplifier
PMI Model No. PM2-34-218-15-SFF-1 is a 2.5 to 18.0GHz low noise amplifier with a gain window of 32.0 to 36.0dB @ -40ºC to +95ºC and 32.0 to 37.0dB @ -54ºC to +95ºC and a gain flatness of +/-1.5dB max. The noise figure is 4.7dB max and offers an OP1dB of +16dBm min. The operating voltage is... Read more »
PMI Model No. DTO-218-CD-1
PMI Model No. DTO-2G18G-CD-1 is a digitally controlled oscillator (DTO's) covering the frequency range of 2.0GHz to 18.0GHz. This model is designed to withstand stringent military ground or airborne environments. Incorporated in the design is the latest internal digital calibration techniques such... Read more »
PMI Model No. BRF17D6G-20M-CD-1
PMI Model BRF17D6G-20M-CD-1 is a band reject "notch" filter having a passband of DC to 17.47GHz and 17.77 to 20.0GHz and over 40dB of rejection at 17.59 to 17.61GHz. Insertion loss in the passband is less than 5dB and VSWR is better than 2.0:1. This filter is supplied with SMA Female connectors and... Read more »
PMI Model No. DGM-18G40G-292FF-DS
PMI Model No. DGM-18G40G-292FF-DS is a Quad Phase & Amplitude Matched mmW (Milimeter Wave) Diplexer-Gain module designed to operate over the 18.0 to 40GHz frequency range with a switched output and an integrated power divider feeding the four antenna inputs via a 20dB coupler for ease of system set... Read more »
