Products by Planar Monolithics Industries, Inc.

PMI offers a full line of RF and Microwave Amplifiers that range from 250kHz up to 40.0GHz. Many options are available. If you do not see exactly what you require on this web site please contact us because we offer amplifiers designed and built to your specifications at catalog... Read more »

PMI offers a full line of RF and Microwave, Solid-State Attenuators that range from a few Mega-Hertz up to 40GHz. While we offer many standard models, various options are available. If you do not see exactly what you require on this web site please contact us because we offer attenuators... Read more »

PMI offers a full line of RF and Microwave detector products that range from 2MHz up to 40.0GHz. Many options are available. Read more »

PMI offers the highest quality filters, switch filter banks, filter assemblies, diplexers, multiplexers for commercial and military applications in the frequency range of DC to 40GHz. Filter Types Offered: • Lumped Element • Combline / Interdigital • Narrow Bandwidth Cavity •... Read more »

PMI offers a full line of RF and Microwave frequency discriminator products that range from a few MHz up to 40.0GHz. Many options are available. If you do not see exactly what you require on this web site please contact us because we offer designs that are built to your specifications at... Read more »

PMI offers a few standard I/Q Vector Modulators as well as custom designed models to your specifications.. Features: • High Speed Modulation • Low Spurious Response • Low Insertion Loss • High Absolute Phase Accuracy • Low Current Consumption • Small Size Read more »

PMI offers a variety of limiters covering the DC to 40GHz frequency range. PMI's limiters offer low loss along with low leakage levels. Our limiters can be designed to meet you custom electrical and mechanical specifications. Features: • DC to 40GHz Models Available • Surface Mount... Read more »

PMI offers the highest quality multi-function modules and integrated microwave assemblies for commercial and military applications in the frequency range of a few MHz to 40GHz. Built to your specifications, Functions to include: • Amplification • Attenuation • Filtering •... Read more »

PMI offers the highest quality phase shifter's and bi-phase modulator's for commercial and military applications in the frequency range of a few MHz to 40GHz. Features of Phase Shifter's: • 0 to 360 Degrees • Analog Controlled • Digital Controlled • Fast Speed • Low Insertion... Read more »

PMI offers the highest quality power divider's and power combiner's for commercial and military applications in the frequency range of a few MHz to 40GHz. Features: • Low Loss • High Isolation • Excellent Amplitude Balance • Excellent Phase Balance • Small... Read more »

PMI offers the highest quality quadrature hybrid couplers for commercial and military applications in the frequency range of a few MHz to 40GHz. Features of Quadrature Hybrid Couplers: • Broadband Response • High Isolation • Excellent Amplitude Balance • Excellent Phase Balance •... Read more »

PMI offers a variety of SDLVA's covering the DC to 40GHz frequency range. PMI's SDLVA's offer high dynamic range along with excellent temperature stability. As well, most SDLVA's provide a limited IF output. Features: • DC to 40GHz Models Available • Excellent Frequency Response... Read more »

PMI offers a full product line of RF Switch Matrices that operate over the 20MHz to 40GHz frequency range. Three standard models are offered that cover this frequency range, namely 20MHz to 3.0GHz, 2.0GHz to 18.0GHz, and 18.0GHz to 40.0GHz. Any of the three models can be supplied as either a... Read more »

PMI offers various RF and Microwave products that range from 250kHz up to 40.0GHz which are supplied in a ruggedized, 1U to 6U chassis. Many options are available. If you do not see exactly what you require on this web site please contact us because we offer amplifiers designed and built to... Read more »

PMI's Solid-State Switches Read more »

PMI offers a full line of switchable output amplifiers that cover the 500kHz to 40GHz frequency range. These amplified switches offer the following features: Features: • Frequency Ranges from 500kHz to 40GHz • Zero Loss or Gain Levels up to 60dB • Output Power Levels up to +30dBm... Read more »

PMI would like to announce its newest solid-state switch that offers a level of performance exceeding industry standards. PMI Model No. P2T-100M1G-90-T-55-SFF is an absorptive, SP2T solid-state switch that covers the 100MHz to 1.0GHz frequency range. This model offers extremely low insertion... Read more »

PMI would like to announce its newest solid-state switch that offers a level of performance exceeding industry standards. PMI Model No. P5T-100M1G-90-T-55-SFF is an absorptive, SP5T solid-state switch that covers the 100MHz to 1.0GHz frequency range. This model offers extremely low insertion... Read more »

PMI would like to announce its newest solid-state switch that offers a level of performance exceeding industry standards. PMI Model No. P2T-8G11G-90-T-SFF is an absorptive, SP2T solid-state switch that covers the 8.0GHz to 11.0GHz frequency range. This model offers extremely low insertion... Read more »

PMI offers a full line of digitally controlled oscillators (DTO's) covering various frequencies in the 500MHz to 18GHz range. All models are designed to withstand stringent military ground or airborne environments. These models use the latest internal digital calibration techniques such that... Read more »

PMI Model No. P4T-0R1G20G-100-T-SFF PMI Model P4T-0R1G20G-100-T-SFF is a Single Pole, Four Throw, Solid-State Absorptive Switch which operates over the 100MHz to 20.0GHz frequency range. This model provides 110dB of isolation over the entire frequency range of operation and offers low... Read more »

PMI Model No. P8T-0R1G20G-110-T-512-SFF PMI Model P8T-0R1G20G-110-T-512-SFF is a Single Pole, Eight Throw, Solid-State Absorptive Switch which operates over the 100MHz to 20.0GHz frequency range. This model provides 110dB of isolation over the entire frequency range of operation and offers... Read more »

PMI Model No. P2T-18G40G-65-R-292FF PMI Model P2T-18G40G-65-R-292FF is a Single Pole, Two Throw, Solid-State Switch which operates over the 18GHz to 40.0GHz frequency range. This model provides 55dB of isolation over the entire frequency range of operation and offers low insertion loss... Read more »

PMI Model P2T-335M535M-30-R-SFF-20W is a Single Pole, Two Throw, Solid-State Switch that operates over the 335 to 535MHz frequency range. Other designs up to 18GHz are available. This model provides over 40dB of isolation and has a ultra low insertion loss of 1.0dB maximum. This model is... Read more »

PMI Model HP-26D5G-40G-CD-292FF is a suspended substrate, high pass filter that has a passband of 26.5 to 40.0GHz. This model offers less than 2dB insertion loss while offering over 54dB of rejection at 20GHz and below. This model is supplied in an ultra-small housing that measures only 0.65"... Read more »

PMI Model No. P2T-1G18G-10-R-528-SFF-HIP10W PMI Model P2T-1G18G-10-R-528-SFF-HIP10W is a 1.0 to 18.0GHz, Solid-State SPDT switch that can handle up to 10 watts CW of input power for all operating conditions. This switch provides ultra-fast switching speeds of 40nsec, 25dB of isolation and... Read more »

PMI Model No. PTB-40-0R118-6R5-21-120VAC-1U-SFF PMI Model number PTB-40-0R118-6R5-21-120VAC-1U-SFF is an integrated microwave assembly that provides high gain and operates from 100MHz to 18.0GHz. This unit features integrated digitally controlled attenuators with ranges up to 60dB. The... Read more »

PMI Model No. DTA-100M40G-30-CD-1 PMI Model Number DTA-100M40G-30-CD-1 is a 5-Bit, digitally controlled 30dB PIN diode attenuator with a step resolution of 1dB covering the frequency range of 100MHz to 40GHz. This model operates on +5VDC and only draws 40mA. Attenuation accuracy of 0.6dB... Read more »

PMI Model No. PS-360-2D4G2D5G-10-CD-SFF PMI Model Number PS-360-2D4G2D5G-10-CD-SFF is a 2.4GHz to 2.5GHz, 10-Bit digitally controlled phase shifter that offers up to 360 degrees of phase shift range. This model has a LSB of 0.36 degrees and a low insertion loss of 4.0dB typically. This... Read more »

PMI Model No. PVVAN-0R4G6G-40-MP-1 PMI Model Number PVVAN-0R4G6G-40-MP-1 is a non-reflective, linearized, voltage controlled pin diode attenuator. This model operates over the 400MHz to 6.0GHz frequency range and provides up to 40dB of attenuation range from 0 to +10VDC control voltage.... Read more »

PMI Model PTB-42-1G40G-12-292FF-DC12 is a portable amplifier that operates over the 1.0 to 40.0GHz frequency range. This model provides 40dB of typical gain with an OP1dB of +22dBm typical (1-18GHz) and +18dBm typical (18-40GHz). This amplifier features an on / off switch that is located on... Read more »

8.0GHz to 18.0GHz, SDLVA featuring Temperature Compensation, Single +5VDC Supply and Operation up to +95 Deg. C PMI Model No. SDLVA-8G18G-40-5-SFF PMI Model SDLVA-8G18G-40-5-SFF is an 8-18GHz Successive Detection Log Video Amplifier that is supplied in a ruggedized, hermetically sealed... Read more »

PMI Model PSM-50M1G-CD-1 is a single sideband modulator that operates over the 50MHz to 1.0GHz frequency range. The input P1dB is +5dBm typical and has an IF Modulation Range of DC to 10MHz. The IF Modulation Power Range is +7dBm minimum and +13dBm maximum into 50 ohms. The conversion loss is... Read more »

PMI Model Number PS-360-8D5G11G-8-SFF-LVT is a 8.5 to 11.0GHz, 8 Bit Digitally controlled phase shifter with capability of phase shift ranges from 0 to 360 degrees. The phase shift resolution is 1.41 degrees and controlled by eight, low voltage TTL control lines. This model has a typical... Read more »

PMI Model BRF17D6G-20M-CD-1 is a band reject "notch" filter having a passband of DC to 17.47GHz and 17.77 to 20.0GHz and over 40dB of rejection at 17.59 to 17.61GHz. Insertion loss in the passband is less than 5dB and VSWR is better than 2.0:1. This filter is supplied with SMA Female connectors... Read more »

PMI Model PSM-0R5G2R5G-CD-1 is a single sideband modulator that operates over the 500MHz to 2.5GHz frequency range. The input P1dB is +5dBm typical and has an IF Modulation Range of DC to 500MHz. The IF Modulation Power Range is +7dBm minimum and +13dBm maximum into 50 ohms. The conversion loss... Read more »

PMI Model No.P2T-500M40G-USB is a state-of-the-art SPDT, Absorptive switch that operates from 500MHz to 40GHz. This switch is powered and controlled via USB 2.0 and is supplied with a Graphic User Interface (GUI) that allows to control of the switch via your PC. This model offers low insertion... Read more »

PMI Model No. DTO-2G18G-CD-1 is a digitally controlled oscillator (DTO's) covering the frequency range of 2.0GHz to 18.0GHz. This model is designed to withstand stringent military ground or airborne environments. Incorporated in the design is the latest internal digital calibration techniques... Read more »

PMI Model PSAT-2500-11B-CD-1 is a 2.5GHz, 11 Bit Digitally Controlled Attenuator / Analog Phase Shifter assembly having the capability for phase shifting from 0 to 360° with an attenuation range of 60dB minimum. This model has insertion loss of 10dB maximum and a VSWR of 1.5:1 maximum into 50... Read more »

Model PS-90-2040-SY is a Miniature 0 to 180 Degree Bi-Phase Modulator / Phase Shifter with TTL Control Logic operating over a Frequency Range of 2,856MHz ±15MHz. This model provides low loss of 1.0dB maximum and offers a fast switching time of 50nsec maximum. This model is designed to handle an... Read more »

Model Number PS-9G11G-3609-A-SFF is an analog controlled phase shifter that operates over the 9.0 to 11.0GHz frequency range. This model utilizes a phase shift control voltage ranging from -7.5V to +7.5V for a corresponding phase shift of 0 to 360 degrees. The insertion loss is 7dB typical with... Read more »

PMI Model No.P2T-14D415D4-15-SMT-20W is a driverless high-power SP2T switch in a compact package designed for surface mount applications. This switch operates from 14.4 to 15.4GHz and has an insertion loss of 1.2dB maximum at +25°C. The Tx/Rx isolation is 10dB minimum and this switch can handle... Read more »

Model LM-2G8G-13-5W-SFF is a high power limiter that operates from 2.0GHz to 8.0GHz. This limiter handles 5 Watts CW input power while the insertion loss is only 1.0dB typically and has a VSWR of 2.0:1 maximum. This model offers an ultra-fast recovery time of 40nsec maximum and is supplied in a... Read more »

PMI Model No. PEC-60-10K40M-3R5-14-12-SFF is a low noise amplifier that operates from 10kHz to 40MHz. This amplifier provides over 60dB of gain and offers a low noise figure of 3.5dB maximum. The output power at 1dB gain compression is +14dBm minimum. This amplifier operates from a single +12V... Read more »

PMI Model 8C1542D5-35-CD-SFF is a band pass filter centered at 1542.5MHz with a nominal bandwidth is 35MHz. This model offers a low insertion loss of 1.0dB maximum and maintains a passband VSWR of 1.5:1 maximum. This filter offers a 8 pole response and is packaged in an aluminum housing... Read more »

PMI Model BP13G-10G-CD-SFF is a suspended substrate bandpass filter that offers a wide passband of 8 to 18GHz. This filter offers a low insertion loss of 1.5dB typically and a passband VSWR of 2.0:1 maximum. Stopband rejection of 70dB typical is provide from DC to 6GHz and from 20 to 23GHz. This... Read more »

PMI Model BPF1370-50-CD-TNCMF-BL is a bandpass filter with a center frequency of 1370MHz and a 1dB Bandwidth of 50MHz. This filter provides an ultimate stopband rejection of 60dBc and is rated to handle an input signal level of 6 watts, 10% duty factor. This model offers low loss of less than... Read more »

PMI Model BRF1370-50-CD-TNCFF-BL is a band reject filter with center frequency of 1370MHz and a notch bandwidth of 60MHz with a notch depth is 50dB. This filter is rated to handle 10 watts and is supplied with TNC connectors. The package measures 6.69" x 3.15" x 0.79". Read more »

PMI Model BRF1370-50-CD-TNCFF-LK is a band reject filter with center frequency of 1370MHz and a notch bandwidth of 60MHz with a notch depth is 50dB. This filter is rated to handle 10 watts and is supplied with TNC connectors. The package measures 3.25" x 0.77" x 1.0". Read more »

PMI Model No. PIA-10G-CD-1 is a 10GHz Integrated, Dielectric Resonator (DRO) Module with three outputs, each having a 0 to 360 degree analog controlled, variable phase shifter and 0 to 10dB analog controlled, variable output control capability on each of the outputs. This model provides a low... Read more »

PMI Model BPF1370-50-CD-TNCMF is a bandpass filter with a center frequency of 1370MHz and a 1dB Bandwidth of 50MHz. This filter provides an ultimate stopband rejection of 60dBc and is rated to handle an input signal level of 6 watts, 10% duty factor. This model offers low loss of less than 3dB... Read more »

PMI Model No. FD-0518-10-812 is a 8.0 to 12.0GHz Frequency Discriminator that provides a video output of 50mV/GHz and has an accuracy of +/-200MHz. The rise time is less than 20nsec and operates into a 100 ohm video load. This model operates on +/-15VDC and measures 2.0" x 1.8" x 0.5". Other... Read more »

PMI Model No. DLVA-6G18G-50-HERM is a DLVA (Detection Logarithmic Video Amplifier) designed to operate over the frequency range of 6.0 to 18.0GHz. This DLVA has a minimum TSS of -72dB and provides a logging range of -70 to 0dBm. The log slope is 25mV/dB with a log accuracy of ±4dB maximum. The... Read more »

PMI Model No. SAA-500M18G-20DB-SFF is a switch bit attenuator that operates over the frequency range of 500MHz to 18GHz. This model provides 20dB of attenuation when a TTL "0" is applied and less than 3dB of insertion loss when TTL "1" is applied. This attenuator switches between states in less... Read more »

PMI Model No. QC-5D3G6G is a quadrature coupler that operates over the frequency range of 5.3 to 6.0GHz. This model provides low loss of 1dB and an isolation of 18dB minimum. The VSWR is 1.4:1 maximum into a 50 ohm impedance. The amplitude balance is ±0.7dB maximum and the phase balance is ±5... Read more »

PMI Model No. PE2-25-7G10G-5R0-20-SFF is a low-noise amplifier that operates over the frequency range of 7.0 to 10.0GHz. This model provides gain of 22dB minimum with a maximum noise figure of 5.0dB. The output power at 1dB gain compression is +20dBm minimum and the output OIP3 is +27dBm... Read more »

PMI Model No. PEC-14-127-8-12-SFF-1 is an ultra-broadband amplifier that operates over the frequency range of 1.0 to 26.5GHz. This model provides gain of 13 to 17dB and has a maximum gain flatness of ±1.5dB. The maximum noise figure is 5.5dB from 1.0 to 20.0GHZ and 6.0dB from 20.0 to 26.5GHz.... Read more »

PMI Model No. PE2-42-2G-2R0-15-SFF is a low-noise amplifier that operates over the frequency range of 1.4 to 2.4GHz. This model provides gain of 42dB minimum with a typical noise figure of 1.8dB. The output power at 1dB gain compression is +22dBm typical and the output IP3 is +30dBm typical.... Read more »

PMI Model No. P4T-10G40G-60-T-GPO is a single pole, four throw, absorptive, solid-state switch that operated over the frequency range of 10GHz to 40GHz. This model provides over 60dB of isolation and has an insertion loss of 6dB maximum. The VSWR is better than 2.0:1 into a 50 ohm impedance.... Read more »

PMI Model No. P1T-26D532D5-90-1212-292FF is an absorptive, single pole, single throw, solid-state switch that operates over the frequency range of 26.5 to 32.5GHz. This model provides a minimum isolation of 90dB and maintains low insertion loss of 5.0dB maximum. The VSWR is 2.0:1 maximum into 50... Read more »

PMI Model LM-6D7G7D9G-30W-SFF is a RF limiter that operates in the 6.7 to 7.9GHz frequency range. This limiter can handle 30 watts CW input power and provides a maximum leakage of +18dBm. This model has a low insertion loss of 1.1dB maximum and a recovery time of 10usec maximum. This limiters is... Read more »

Model APD-2-0518-YR1 is a 2-Way Power Divider / Combiner that operates over the frequency range of 500MHz to 18GHz. This model offers low loss of 3.5dB typical (over 3dB theoretical) with a VSWR of 1.5:1 typical into a 50 ohm impedance. The average isolation is 20dB. This model offers a typical... Read more »

PMI Model No. PS-360-900M930M-6-SFF is a 900MHz to 930MHz, 6-BIT digitally controlled phase shifter having a LSB of 5.6 degrees. The insertion loss is 7dB typical, 7.5dB maximum with a typical VSWR of 2.0:1. This is a high speed phase shifter that can switch from one phase state to the next in... Read more »

PMI Model No. PE2-28-20R040R0-5R5-18-12-SFF is a 20GHz to 40GHz low noise amplifier that typically provides 28dB of gain. The gain flatness is ±2.5dB maximum and ±1.5dB typical with a noise figure is 5.5dB typical. This amplifier provides a minimum OP1dB of +15dBm minimum. The VSWR is 2.3:1 into... Read more »

PMI Model No. PE2-30-0R56R0-5R0-22-12-SFF is a 500MHz to 6.0GHz low noise amplifier that typically provides 30dB of gain. The gain flatness is ±1.0dB maximum with a noise figure is 5.0dB typical. This amplifier provides a minimum OP1dB of +21dBm. The VSWR is 2.0:1 maximum into 50 ohms impedance... Read more »

PMI Model No. PEC2-60-4G8G-1R75-14-12-SFF is a 4.0GHz to 8.0GHz low noise amplifier that typically provides 60dB of gain. The gain flatness is ±1.25dB maximum with a noise figure is 1.75dB maximum. This amplifier provides a minimum OP1dB of +14dBm. The VSWR is 2.0:1 maximum into 50 ohms... Read more »

Model SDLVA-0R71R3-75-CD-3 is a Successive Detection Log Video Amplifier that operates over the 700 to 1300MHz frequency range. This model has a Dynamic Range of 75dB, a log slope of 40mV/dB. The log linearity is ±1.2dB typical from -65 to +5dBm input power levels and a typical TSS of -70dBm.... Read more »

The PS-360-DC-IR-9G10G is a 10-Bit digitally controlled 360 degree phase shifter that operates from 9.0 to 10.0GHz. This model offers low insertion loss of 7.5dB and a phase shift accuracy of ±0.6 degrees typically. The typical switching speed is 300nsec and operates with input power levels up... Read more »

PMI Model No. PIA-12D8G-CD-1 is a Phase Locked, Dielectric Resonator Oscillator with Internal Reference having an output frequency of 12.8GHz. This model provides a minimum output of +13dBm with all spurs held to -80dBc and harmonics held to -25dBc. The frequency stability is ±3 ppm with an... Read more »

PMI Model No. PUB-15-30M20G-20-LCA is a 30MHz to 20.0GHz Low Noise Amplifier which provides 15dB of gain while maintaining a gain flatness of ±2.5dB typically over the operating frequency. The noise figure is 3dB typical and offers a typical OP1dB of +20dBm. The amplifier requires +12 to +15VDC... Read more »

PMI Model No. PUB-14-30M20G-14-LCA is a 30MHz to 20.0GHz Low Noise Amplifier which provides 14dB of gain while maintaining a gain flatness of ±1.2dB typically over the operating frequency. The noise figure is 3dB typical and offers an OP1dB of +14dBm typical. This amplifier requires +12 to... Read more »

PMI Model Number LM-30M3G-C3-1 is a high power limiter that operates from 30MHz to 3.0GHz. This limiter can handle input power levels up to 5 watts CW and provides a maximum leakage of +10dBm. The insertion loss is 1.2dB maximum with a maximum VSWR of 1.5:1. The recovery time is less than 1usec.... Read more »

PMI Model No. PE2-30-218-4R0-20-12-SFF-BT is a 2.0 to 18.0GHz Low Noise Amplifier that has an integrated bias-tee network on the output port. This amplifier provides 30dB of gain while maintaining a maximum gain flatness of ±2.0dB max over the operating frequency. The noise figure is less than... Read more »

PMI Model No. PS-500M2G-8B-SFF is a Stare-Of-The-Art, 8-Bit Digitally Controlled Phase Shifter that operates over the 500MHz to 2.0GHz frequency range. This model has a typical insertion loss of 10dB and offers 360 degrees of phase shift via 8-Bit TTL control. The phase shift error is less than... Read more »

PMI Model CDT-2M18-30-BB Options DE, D is a threshold detector that operates over the 2MHz to 18GHz frequency range. This model has a low insertion loss of 2.5dB maximum and operates over an input power range of -30 to 0dBm. The threshold level is adjustable and the output signal is TTL positive... Read more »

PMI Model No. P4T-100M2G-50-T-SFF-IN is an absorptive, single pole, four throw solid-state switch that operates over the 100MHz to 2.0GHz frequency range. The insertion loss is less than 3dB and offers port to port isolation of over 50dB. The switching speed is 25nsec maximum and the rise and... Read more »

Model LM-26G40G-14-20W-292MM is a high power limiter capable of withstanding an input power level of 20 Watts, 440 to 670nsec Pulse Width, PRF 600 to 900kHz, 40% Duty Cycle. This model operates in the 26.5GHz to 40GHz frequency range. The insertion loss is 4.0 dB maximum, VSWR of 2.0:1 and... Read more »

PMI Amplifier Model PEC-38-30M18G-12-SFF is a broadband, low noise amplifier that operates over the 30MHz to 18GHz frequency range. This model provides 38dB of gain and has a gain flatness of ±2.0dB maximum. The noise figure is 5dB maximum and the OP1dB is +12dBm minimum. This amplifier... Read more »

PMI Model No. PBB-20-218-16-LCA is a 2.0 to 18.0GHz Low Noise Amplifier which provides 20dB of gain while maintaining a gain flatness of ±2.0dB maximum over the operating frequency. The noise figure is 4dB typical and offers a typical OP1dB of +14dBm minimum. The amplifier requires +12 to +15VDC... Read more »

PMI Model No. PE2-1020-R518-12-SFF is a low noise amplifier that offers a positive gain slope versus frequency. This type of amplifier is useful when trying to equalize frequency flatness over a broad bandwidth. This model provides 10dB of gain at 500MHz and 20dB of gain at 18GHz. The noise... Read more »

PMI Model No. PEC-85-0R32R5-15LM-12-SFF is a limiting amplifier that operates over the frequency range of 300MHz to 2.5GHz. This model provides a gain of 85dB typically and a limited output of +15dBm ± 2.5dBm. The typical noise figure is 5dB and a maximum VSWR of 2.0:1 is maintained under all... Read more »

PMI Model No. PEC3-33-218-20-15-SFF-HS-E is a 2.0 to 18.0GHz Low Noise Amplifier that provides greater than 33dB of gain while maintaining a maximum gain flatness of ±2.0dB maximum over the operating frequency. The noise figure is 4dB typical and offers an OP1dB of +20dBm minimum and an OIP3 of... Read more »

PMI Model No. P4T-10G40G-60-T-GPO is a single pole, four throw, absorptive, solid-state switch that operated over the frequency range of 10GHz to 40GHz. This model provides over 60dB of isolation and has an insertion loss of 6dB maximum. The VSWR is better than 2.0:1 into a 50 ohm impedance.... Read more »

PMI model SDLVA-315M362M Successive Detection Log Video Amplifiers (SDLVA) offers 65dB Dynamic Range over the frequency range of 315 to 362MHz. This model offers a fast rise time of 35nsec maximum and a recovery time of less than 500nsec. The unit is temperature compensated such that log... Read more »

PMI Model No. PUB-15-500M20G-20-LCA is a 500MHz to 20.0GHz Low Noise Amplifier which provides 15dB of gain while maintaining a gain flatness of ±1.75dB typically over the operating frequency. The noise figure is 3dB typical and offers a typical OP1dB of +20dBm. The amplifier requires +12 to... Read more »

PMI Model PS-180-4R15R3-SFF is a 0 /180 Degrees, Bi-Phase Modulator designed to operate over the 4.1 to 5.3GHz frequency range. This model can handle RF input signal levels up to +30dBm without damage; has an insertion loss of 3.0dB maximum and a maximum VSWR of 1.7:1. A TTL control will... Read more »

PMI Model No. PEC-37-9G10G-3R0-27-SFF is a Low Noise Amplifier that operates over the 9.0 to 10.0GHz frequency range. This model provides 28dB of gain and offers a low noise figure of 3.0dB maximum. The amplifier provides an OP1dB is +27dBm minimum and operates on +10 to +15VDC with 400mA of... Read more »

PMI Model No. PEC3-40-30M26R5G-6R0-12-12-SFF is a 30MHz to 26.5GHz Low Noise Amplifier that provides greater than 35dB of gain while maintaining a maximum gain flatness of ±3.5dB maximum over the operating frequency. The noise figure is 6.0dB typical and offers an OP1dB of +12dBm minimum. The... Read more »

PMI Model No. PE2-35-1R02R0-1R4-17-12-SFF is a Low Noise Amplifier that operates over the 1.0 to 2.0GHz frequency range. This model provides 35dB of gain and offers a low noise figure of 1.4dB typically. The amplifier provides an OP1dB is +17dBm and operates on +12 to +15VDC with 160mA of... Read more »

PMI Model No. P4T-100M40G-90-T-512-292FF-SP is a 100MHz to 40GHz, Ultra-Compact, High Speed, Single Pole, Four Throw, Absorptive Switch. This switch offers over 100dB of port to port isolation from 100MHz to 18GHz, over 90dB from 18 to 26.5GHz and over 75dB from 26.5 to 40GHz. This switch has... Read more »

PMI Model 7CL5125-1490-CD-SFF is a band pass filter centered at 5125MHz and has a nominal bandwidth of 1490MHz. This filter provides over 40dB of rejection between 3.0 to 3.658GHz and between 6.65 to 7.3GHz and over 65dBc of rejection between 1.5 to 2.5GHz. This filter has a low insertion loss... Read more »

PMI Model No. PE2-25-218-20-12-SFF is a 2.0 to 18.0GHz Low Noise Amplifier that provides greater than 25dB of gain while maintaining a maximum gain flatness of ±1.5dB maximum over the operating frequency. The noise figure is 4.5dB typical and offers an OP1dB of +20dBm minimum. The operating... Read more »

PMI Model No. LM-18G40G-18-1W-292FF is an Ultra-High Speed, Millimeter Wave, High Power RF Limiter that operates over the frequency range of 18.0 to 40.0GHz. This limiter can handle input power levels up to 1 Watt CW and provides a leakage output power of +18dBm maximum and +12dBm typical. The... Read more »

PMI Model No. P4T-60M20G-100-T-SFF is a Solid-State, Single-Pole Four Throw switch that operates from 60MHz to 20GHz. This switch is designed to offer ultra-high isolation of 100dB minimum while maintaining a low insertion loss of 5.5dB maximum. The specified switching speed is 300nsec maximum,... Read more »

PMI Model No. Model Number PEC-1227/1575-IAFS-SFF which is a multi-function, integrated module that provides amplification and dual passband filtering within the GPS L1 & L2 frequency bands of 1575.42MHz and 1227.60MHz. Two input channels are switchable to a common output. This product is... Read more »

PMI Model No. PDVAN-8018-60-8-OPT25DBM is an 8-Bit digitally programmable attenuator that operates over the frequency range of 8.0 to 18.0GHz. This model offers low loss of 3.6dB typically and an attenuation range of 60dB. This model was designed to handle input power levels up to +25dBm CW... Read more »

PMI Model No. POB-16-48-22-LCA is a 4.0 to 8.0GHz Low Noise Amplifier which provides 16dB of gain while maintaining a gain flatness of ±1.0dB typically over the operating frequency. The noise figure is 3dB typical and offers a typical OP1dB of +22dBm. The amplifier requires +12 to +15VDC and the... Read more »

PMI Model No. PS-360-3237-8-292FF is a High Speed, Millimeter Wave, 8-Bit Digitally Controlled, Phase Shifter that operates over the frequency range of 32.0 to 37.0GHz. This phase shifter offers a low insertion loss of 13dB typically and maintains a VSWR of 1.8:1. The total phase shift range... Read more »

PMI Model No. 8CL14D6G-2D4G-CD-SFF is a a band pass filter centered at 14600MHz and has a nominal 3dB bandwidth of 2400MHz. This filter has low loss of under 1.5dB within the passband and a VSWR of 1.5:1 maximum. The size of the filter is 1.70" x 0.625" x 0.40". Read more »

PMI Model Model 6CL9227D5M-180-CD-SFF is a a band pass filter centered at 9227.5MHz having a nominal bandwidth is 180MHz. This filter offers low loss of 1dB typical and a VSWR of 1.5:1 max. The phase linearity from 9207.5 to 9247.5MHz is +/-3.2 degrees typical. This filter offers -60dB of... Read more »

PMI Model No. P2T-1090M-70-T-55-SFF is a Solid-State, Single Pole, Two Throw Absorptive Switch that operates at 1090MHz ±60MHz. This switch offers low insertions loss of 2.5dB maximum, 70dB minimum isolation and a switching speed of less than 100nsec. The operating DC voltages are ±5 volts and... Read more »

PMI Model No. LM-18G40G-SMT-1 is a high power limiter capable of withstanding an input power level of 20 Watts, 440 to 670nsec Pulse Width, PRF 600 to 900kHz, 40% Duty Cycle. This model operates in the 18GHz to 40GHz frequency range. The insertion loss is 4.0 dB maximum, VSWR of 2.0:1 and... Read more »

PMI Model No. 11DP-11R5/16R5-CD-SFF is a diplexer that offers passbands at 10.75 to 12.25GHz and 15.75 to 17.25GHz. The passband insertion loss is less than 3dB and the VSWR is 1.5:1 maximum. Filter channel 1 has a passband of 10.75 to 12.25GHz and offers -50dBc of rejection at 10.25GHz and... Read more »

PMI Model No. IFE-DRS-KIT is an Integrated Front End (IFE) unit that consists of a low noise amplifier, RF Log Detector, and a low noise video amplifier. This integrated unit was designed to support a phased array radar automated test set. Read more »

PMI Model Number PEC-1227/1575-IAFS-SFF which is a multi-function, integrated module that provides amplification and dual passband filtering within the GPS L1 & L2 frequency bands of 1575.42MHz and 1227.60MHz. Two input channels are switchable to a common output. This product is designed to... Read more »

PMI Model No. SDLVA-100M700M-70 is a Successive Detection Video Log Amplifier (SDLVA) that operates over the 100 to 700MHz Frequency Range. It has a Dynamic Range of >55dB, a TSS of -60dBm typical and a Nominal Video Bandwidth of 20MHz. Furthermore, it has been designed using cutting edge GaAs... Read more »

PMI Model No. PCH-180-3D13D5-SFF is a 180 Degree Hybrid Coupler that operates from 3.1 to 3.5GHz. This ring-line coupler provides a low insertion loss if 0.4dB typically and a maximum VSWR of 1.3:1. The amplitude balance is typically ±0.3dB and the phase balance is typically ±3 degrees whiule... Read more »

PMI Model 7CL5125-1490-CD-SFF is a a band pass filter centered at 5125MHz and has a nominal bandwidth of 1490MHz. This filter provides over 40dB of rejection between 3.0 to 3.658GHz and between 6.65 to 7.3GHz and over 65dBc of rejection between 1.5 to 2.5GHz. This filter has a low insertion... Read more »

PMI Model No. 11DP-11R5/16R5-CD-SFF-1 is a diplexer that offers passbands at 10.75 to 12.25GHz and 15.75 to 17.25GHz. The passband insertion loss is less than 3dB and the VSWR is 1.5:1 maximum. Filter channel 1 has a passband of 10.75 to 12.25GHz and offers -50dBc of rejection at 10.25GHz and... Read more »

PMI Model No. LM-0518-10-1W-SHS-1-F is a high speed, high power, hard diode limiter that operates over the frequency range of 0.5 to 18.0GHz. This limiter handles 100 Watts Peak Power with a pulse width of 1us The insertion loss is less than 2dB typically and has a VSWR of 2.0:1 maximum. This... Read more »

PMI Model No: SDLVA-3G18G-CW-70-MAH is a CW-Immune Successive Detection Log Video Amplifier operating in the 2.0 to 18.0GHz frequency band. It features an SPST on the RF output which allows for the RF to be blanked when the RF input signal is below the -64dBm threshold. In addition to RF... Read more »

PMI Model No. P2T-1G18G-10-R-5V-SFF-HIP10W-HERM is a hermetically sealed, reflective, single pole, two throw pin diode switch that operates over the 1.0 to 18.0GHz frequency range. This model is capable of handling an input power level of 5 watts CW while providing switching speeds of less than... Read more »

PMI Model No. LM-0518-10-1W-SHS-2-M-1218 is a high power limiter that operates from 12.0 to 18.0GHz. This limiter handles 100 Watts Peak Power with a pulse width of 1usec. The insertion loss is only 1.5dB typically and has a VSWR of 2.0:1 maximum. This limiter is supplied in a small housing... Read more »

PMI Model No. PFEM-9D4G-CD-1 is a multi-function module that provides amplification, switching and filtering within the frequency band of 9410MHz. This module provides two input channels and is switchable to a common output. This model is designed to offer multiple gain level selection, high... Read more »

PMI Model No. DTA-0R5G18G-60-CD-1 is a non-reflective, 10 bit, programmable 60dB pin diode attenuator with step resolution as low as 0.06dB over the frequency range of 0.5 to 18.0GHz. This model is offered in a slim line housing measuring only 0.5" in height. Read more »

PMI Model No. SDLVA-2G6G-70-CD-1 is a Successive Detection Log Video Amplifier (SDLVA) that operates between the 2.0 to 6.0GHz frequency range. It has a dynamic range of 70dB, a log slope of 40mV/dB and offers very fast rise and fall times of 15nsec and 25nsec respectively. This model is... Read more »

PMI Model No. P2T-12G18G-45-R-SFF-10W is an independently controlled, high power, reflective single pole two throw switch designed to operate between 12.0 to 18.0GHz and handle input power levels up to 10 Watts CW and 30 Watts Peak with a maximum pulse width of 1usec and maximum PRF of 2MHz.... Read more »

PMI Model No. PEC-42-500M40G-20-12-292MM is a 500MHz to 40GHz Ultra-Wideband Low Noise Amplifier that provides typically 42dB of gain with a noise figure of 5.5dB at 20GHz. The OP1dB is typically +22dBm (1.0 to 18.0GHz) and +19dBm (18.0 to 40.0GHz). The maximum input power rating is +17dBm CW... Read more »

PMI Model No. LM-10G-3-26DBM-12V is an active limiter that operates at 10GHz and provides an input dynamic range of -45 to +26dBm. This limiter offers very hard limiting at 0dBm typically and 3dBm maximum. The VSWR on average is better than 1.4:1 and operating voltage is +12 to +15VDC with a... Read more »

PMI Model No. P4T-50M40G-55-T-292FF is a 50MHz to 40.0GHz, Single Pole, Four Throw, Absorptive Switch. This switch offers 55dB of port to port isolation and a maximum insertion loss of 8db. It has a switching speed of 100ns and is independently TTL controlled. The operating power is +20dBm CW... Read more »

PMI Model No. P8T-500M40G-60-T-55-292FF is a High Speed, Single Pole, Eight Throw, Absorptive Switch operating over the frequency range of 0.5 to 40GHz. This switch has over 60dB of isolation and is capable of switching within 50ns. Read more »

PMI Model DTA-22G28G-50-CD-1 is a 50dB monotonic programmable attenuator with 11-bit resolution that provides a step size of 0.025dB. It has also been designed to have very low insertion loss over the frequency range of 22.5 to 27.5GHz. Read more »

PMI Model No. BPF3D875-2D25-CD-SFF is a Bandpass filter that has a center frequency of 3.875GHz and a Passband of 2.25GHz. The passband insertion loss is 2.0dB max with a VSWR of 2.0:1 max. The filter measures 2.50" x 0.8" x 0.5" and is supplied with SMA Female connectors. Read more »

PMI Model No. P2T-5G5D15G-30-R-528-SFF-20W is a single pole, two throw, reflective switch capable of handling input power up to 20 Watts CW. The frequency range is 5000 to 5150MHz and it has 30dB of isolation with a switching speed of less than 40nsec. The unit is supplied with SMA Female... Read more »

PMI Model No. P1T-500M40G-55-T-292FF is an SPST, High Speed, Absorptive Switch. This switch operates at a frequency range of .5 to 40.0GHz and is capable of switching within 100ns. It has 55dB of Isolation and insertion loss of 5.5dB max. Read more »

PMI Model No. P2T-8G12G-100-T-55-SFF is a single pole, two throw, high power, absorptive switch. This switch has high isolation of 100dB min and low insertion loss of 3.0dB typical (5.0dB max). It offers a high switching speed of 100ns max and has an integral TTL driver. Read more »

PMI Model No. P2T-8G18G-45-R-SFF-HP20W is an SP2T, High Power(20 Watt), Reflective Switch. This switch operates on a frequency of 8.0 to 18.0GHz. It has a low insertion loss of 2.5dB max and an integral TTL driver and is hermetically sealed. Read more »

PMI Model No. P2T-960M977M-30-R-528-SFF-20W is a single pole, two throw, reflective switch capable of handling input power up to 20 Watts CW. The frequency range is 960 to 977MHz and it has over 40dB of typical isolation with a switching speed of less than 40nsec. The unit is supplied with SMA... Read more »

PMI Model No. P5T-500M40G-60-T-55-292FF-5G40G is an SP5T, Absorptive Switch that operates from 0.5 to 40.0GHz. This switch has an insertion loss of < 8.0dB max, >60dB of isolation and is supplied in a small housing measuring 1.353" dia x 0.40" thick. Read more »

PMI Model Number PE2-60-2G8G-2R5-20-12-SFF is a 2.0 to 8.0GHz low noise amplifier which produces 60dB of gain with a maximum noise figure of 2.5dB. The OP1dB is >20dBm and the VSWR is 2.0:1 maximum. This amplifier operates on a DC voltage supply of +12 to +15 volts and the current draw is... Read more »

PMI Model No. SDLVA-100M4G-CD-2 is a successive detection log video amplifier (SDLVA) that operates between the 100 to 4000MHz frequency range and is capable of extending to 6000MHz. It has a dynamic range of 70dB, a log slope of 25mV/dB and a nominal video bandwidth of 11.67MHz. Furthermore,... Read more »

PMI Model Number PE2-34-1R251R75-12-SFF-1 is a 1.25 to 1.75GHz, Temperature Compensated, Low Noise Amplifier with 34dB of gain with a typical gain flatness of +/-0.25dB. The noise figure is typically 4.98dB and offers a minimum OP1dB of 0dBm. The amplifier requires +7 to +12VDC and the current... Read more »

PMI Model No. APD-4-218 is a High Reliable Four Way Power Divider featuring Excellent Amplitude and Phase Balance, Low Insertion Loss, and High Isolation Electrically, and Removable I/O SMA Connectors Mechanically. Read more »

PMI Model No. PEAFS3-12-218-15-SFF-1 is a 2.0 to 18.0GHz low noise amplifier that provides +15 to +22dB of gain. The noise figure is 5.0dB max from 2.0 to 4GHz and 4.1dB max at 4.0 to 18.0GHz and offers an OP1dB of +9dBm min. The operating voltage is +15VDC and the current draw is 180mA max.... Read more »

PMI Model No. DLVA-50M18D5G-40-LIN-LOG-CD-1 is a dual 40dB Detector Log Video Amplifier(DLVA) designed to operate between 50MHz to 750MHz (LO) and 0.75 to 18.5(HI) frequency ranges. It employs planar diode detectors and integrated video circuitry for high speed performance and outstanding... Read more »

PMI Model No. PM2-34-218-15-SFF-1 is a 2.5 to 18.0GHz low noise amplifier with a gain window of 32.0 to 36.0dB @ -40ºC to +95ºC and 32.0 to 37.0dB @ -54ºC to +95ºC and a gain flatness of +/-1.5dB max. The noise figure is 4.7dB max and offers an OP1dB of +16dBm min. The operating voltage is... Read more »

PMI Model No. POB-15-818-13-LCA Rev.B is a 8.0 to 18.0GHz, Low Noise Amplifier which provides 15dB of gain while maintaining a gain flatness of +/-1.5dB typically over the operating frequency. The noise figure is 3.0dB typical and offers a typical OP1dB of +13dBm. The aplifier requires +12VDC... Read more »

PMI Model No. PIQ-0R5G2G-360-20-CD-1 is a 0.5 to 2.0GHz, High Performance I/Q Vector Modulator with 2 x 12 bit monotonic TTL compatible channels (I and Q). This model offers a full 360 degrees of phase shift with a minimum of 20dB of amplitude control. Read more »

PMI Model No. PEC-42-1G40G-20-12-292FF is a 1.0 to 40GHz, Ultra-Wideband Low Noise Amplifier that provides 42dB of gain typically with a typical noise figure of 5.5dB. The OP1dB is typically +22dBm (1.0 to 18.0GHz) and +19dBm (18.0 to 40.0GHz).. The maximum input power rating is +17dBm CW and... Read more »

PMI Model No. PE2-34-2G18G-3R5-15-SFF-VVG is a voltage variable gain amplifier operating over the frequency range 2.0 to 18.0GHz. This amplifier is supplied in our standard PE2 houseing that can be used SMA connectorized or as a surface mount component. It is optimized for 5.5 to 18.0GHz. Read more »

PMI Model No. HADA-D2001 is a Detector Log Video Amplifier (DLVA) that operates between the 0.5 to 2.0GHz frequency range. It has a dynamic range of 40dB, a log slope of 50mV/dB and a nominal bandwidth of 20MHz. Furthermore, it has been designed using cutting edge technology which provides... Read more »

PMI Model No. P2T-2G18G-55-T-512-SFF-LV is a terminated, single pole, two throw switch that operates from the 2.0 to 18.0GHz frequency range and can handle +23dBm CW input power with port to port isolation of 55dB min. This model has low insertion loss while still offering a fast switching... Read more »

PMI Model No. GMDA-D1003 is a Detector Log Video Amplifier (DLVA) that operates between the 7.0 to 18.0GHz frequency range. It has a dynamic range of 75dB, a log slope of 25mV/dB and a nominal video bandwidth of 12MHz. Furthermore, it has been designed using cutting edge GaAs technology which... Read more »

PMI Model No. PEC2-8G18G-21DBM-LM-SFF is an 8.0 to 18.0GHz limiting amplifier that provides an nominal output power level of +20.0dBm for an input power range of -50 to +10dBm CW. This model has output power level versus frequency range compensation such that the limited output power has a flat... Read more »

PMI Model No. PEC-14-127-8-12-SFF Rev B is a wide band front end amplifier that operates over the frequency range of 1.0 to 26.5GHz. This model provides gain of 13dBm to 17dBm and has a maximum gain flatness of +/-1.5dB. The maximum noise figure is 5.5dB from 1.0 to 20.0GHZ and 6.0dB from 20.0... Read more »

PMI Model No. PA-40-17D521D5-5R0-36-12-292FF is a medium power amplifier that operates over the frequency range of 15.7 to 21.5GHz. It has a nominal gain of 40dB typical with a maximum gain flatness of +/-1.75dB and a typical noise figure of 5.0dB. It is supplied with SMA(F) connectors in a... Read more »

PMI Model No. PE2157R52015SFF Rev. D is a 7.5 to 20.25GHz, low noise amplifier that provides a small gain window of 14.5 to 17.5 with a typical gain flatness of +/-1.5dB. The noise figure is 6.0dB max and offers an OP1dB of 18.0dBm min. The operating voltage is +15VDC and the current draw is... Read more »

PMI Model DTA-2G18G-60-CD-2-OPT-1G18G is a non-reflective, 10 BIT, programmable 60dB, pin diode attenuator with step resolution as low as 0.06dB over the frequency range of 1.0 to 18.0GHz. This model is offered in a slim line housing measuring only 0.5" H. Read more »

PMI Model No. 2SFB-8G26G-CD-SFF Rev C is a 2 channel switch filter bank providing a low-pass filter that passes 8.62 to 8.70GHz with a rejection band of 17.24 to 17.4GHz. In by-pass mode the unit passes signals from 8.0GHz to 26.5GHz. This unit is powered by a +5V single supply and the control... Read more »

PMI Model No. GMTA-1005 is a threshold detector designed to operate over the frequency range of 8.0 to 18.0GHz. It has a fixed threshold level of -42dBm with threshold stability of +/-3.0dBm over frequency and temperature. Read more »

PMI Model No. HADA-D2002 is a Detector Log Video Amplifier (DLVA) that operates between the frequency range of 2.0 to 18.0GHz. It has a dynamic range of 40dB with a log slope of 50mV/dB and a nominal video bandwidth of 12MHz. This unit has been designed with cutting edge technology which... Read more »

PMI Model No. LM-10G-3-26DBM-12V is an active limiter that operates over a frequency range of 1.0 to 2.0GHz with maximum input power of +33dBm CW and a maximum leakage power of -15dBm. The VSWR is 2.0:1 and the operating voltage is +12VDC with a typical current draw of 250mA. The unit is... Read more »

PMI Model No. LM-2G18G-2D8-33DBM-12V is an active limiter that operates over a frequency range of 2.0 to 18.0GHz with max input power of +33dBm CW and a maximum leakage power of +2.8dBm. The VSWR is 2.0:1 max the operating voltage is +12VDC with a current draw of 180mA max.. The unit is supplied... Read more »

PMI Model No. 4BP160-5-2A-PP is an LC Bandpass filter centered at 160MHz with PC Pins in and out. Center Frequency 160MHz, +/-0.23% 3dB Bandwidth 5MHz, +/-5% VSWR in the Pass Band 1.5:1 max Pass Band Insertion Loss 10dB nom Rejection 4... Read more »

PMI Model No. 4BP160-10-2A-PP is an LC Bandpass filter centered at 160MHz with PC Pins in and out. Read more »

PMI Model No. 4BP160-20-2A-PP is an LC Bandpass filter centered at 160MHz with PC Pins in and out. Read more »

PMI Model No. 4BP160-40-2A-PP is an LC Bandpass filter centered at 160MHz with PC Pins in and out. Read more »

PMI Model No. P1T-0R5G18G-60-T-512-SFF is a single pole, single throw, absorptive solid state switch that operates over the frequency range of 0.5 to 18.0GHz. This model has a maximum insertion loss of 3.5dB and an isolation specification of 60dB. It operates at 20dBm CW and can survive 1 Watt... Read more »

PMI Model No. PE2-28-218-5R0-12-15-SFF is a 2.0 to 18.0GHz, low noise amplifier that provides 24dB min of gain. The noise figure is 4.5dB max and offers an OP1dB of 14dBm min. The operating voltage is +15VDC and the current draw is 200mA max. The unit is supplied with removable SMA(F)... Read more »

PMI Model No. TD-6G18G-CD-SFF is a high speed threshold detector designed to operate over the 6.0 to 18.0GHz frequency range with an adjustable threshold level of -30 to +10dBm and aVSWR of 3.0:1 max. The unit is supplied with removable SMA female connectors in a compact housing that measures... Read more »

PMI Model No. SDLVA-218-44-70M is a Detector Log Video Amplifier (DLVA) designed to operate over the 2.0 to 18.0GHz frequency range. This model offers a logging range of -40 to +4dBm having a log slope of 70mV/dB. The logging linearity is better than ±0.75dB and the rise time is 25nsec maximum... Read more »

PMI Model No. PE2-30-9R010R0-2R5-21-12-SFF is a low noise amplifier that operates over the 9.0 to 10.0GHz frequency range. This model provides a typical gain of 30dB while maintaining a noise figure of 2.5dB and a OP1dB of 21dBm minimum. The input and output VSWR is better than 2.0:1 and this... Read more »

Model Number DD-20-218-5PF-3-P-M is a high speed Diode Detector optimized for the 2 to 18GHz frequency range. This model offers a fast response of 5nsec, a TSS of -50dBm at 2MHz video bandwidth and a Video Capacitance of 5.6pF. The output voltage polarity is positive, but a negative polarity is... Read more »

PMI Model No. PIQ-2G18G-360-16-CD-1 is a 2.0 to 18.0GHz, high performance I/Q Vector Modulator with 2 x 12 bit monotonic TTL compatible channels (I and Q). This model offers a full 360 degrees of phase shift with a minimum of 16dB of amplitude control. Read more »

PMI Model No. DRO-12D3G-CD-1 is a Dielectrically stabilized GaAs FET Oscillator with a center frequency of 12.3GHz. This model provides minimum output power of +11dBm with all spurs held to -55dBc and harmonics held to -20dBc. The mechanical tuning frequency is +/-25MHz and the unit has a phase... Read more »

PMI Model No. DRO-11D7G-CD-1 is a Dielectrically stabilized GaAs FET Oscillator with a center frequency of 11.7GHz. This model provides minimum output power of +11dBm with all spurs held to -55dBc and harmonics held to -20dBc. The mechanical tuning frequency is +/-25MHz and the unit has a phase... Read more »

PMI Model No. DRO-9D7G-CD-1 is a Dielectrically stabilized GaAs FET Oscillator with a center frequency of 9.7GHz. This model provides minimum output power of +11dBm with all spurs held to -55dBc and harmonics held to -20dBc. The mechanical tuning frequency is +/-25MHz and the unit has a phase... Read more »

PMI Model No. DRO-7D7G-CD-1 is a Dielectrically stabilized GaAs FET Oscillator with a center frequency of 7.7GHz. This model provides minimum output power of +11dBm with all spurs held to -55dBc and harmonics held to -20dBc. The mechanical tuning frequency is +/-25MHz and the unit has a phase... Read more »

PMI Model No. P2T-100M40G-95-T-512-292FF is an absorptive, single pole, two throw pin diode switch that operates over the frequency range of 0.1 to 40.0GHz. This model incorporates a TTL compatible driver for easy system integration. Read more »

PMI Model No. DRO-16D3G-CD-1 is a Dielectrically stabilized GaAs FET Oscillator with a center frequency of 16.3GHz. This model provides minimum output power of +11dBm with all spurs held to -55dBc and harmonics held to -20dBc. The mechanical tuning frequency is +/-25MHz and the unit has a phase... Read more »

PMI Model No. DRO-14D3G-CD-1 is a Dielectrically stabilized GaAs FET Oscillator with a center frequency of 14.3GHz. This model provides minimum output power of +11dBm with all spurs held to -55dBc and harmonics held to -20dBc. The mechanical tuning frequency is +/-25MHz and the unit has a phase... Read more »

Model Number PS-5G18G-400-A-SFF is a 5 to 18GHz, Low Phase Noise, Analog Phase Shifter with Capability for Phase Shifting from 0 to 400 Degrees. The unit operates from a single positive control voltage of 0 to +10VDC with a phase voltage sensitivity of 40 degrees per volt. This model offers a... Read more »

PMI Model No. P6T-2G18G-60-T-512-SFF-LV is a single pole, six throw, absorptive, low video transient, solid state switch operating over the frequency range of 2.0 to 18.0GHz. This model has a maximum insertion loss of 4.0dB and a minimum isolation specification of 60dB with video transients of... Read more »

PMI Model No. TD-2G18G-RL-CD-SFF is a high speed threshold detector designed to operate over the 2.0 to 18.0GHz frequency range with an adjustable threshold level of -30 to -10dBm and a VSWR of 3.0:1 max. This unit is supplied with field removable SMA Female connectors in a small package... Read more »

PMI Model No. P8T-100M40G-85-T-512-292FF is a high speed, single pole, eight throw, absorptive switch operating over the frequency range of 100MHz to 40.0GHz. It is capable of switching within 30ns and has over 90dB of isolation up to 18GHz, 80dB up to 26.5GHz and 70dB up to 40GHz. This model... Read more »

PMI Model No. P4T-2G18G-60-T-512-SFF-LV is a 2.0 to 18.0GHz, single pole, four throw, absorptive, low video transient switch. This model offers 60dB of port to port isolation and a maximum insertion loss of 3.2dB. It has a switching speed of 50ns max and is independently TTL controlled with an... Read more »

PMI Model No. P2T-500M18G-50-T-SFF-I is a terminated, single pole, two throw switch that operates over the frequency range of 0.5 to 18.0GHz. This model handles +23dBm CW input power with port to port isolation of 50dB min. It has a low insertion loss of 2.8dB max while still offering a fast... Read more »

PMI Model No. DTA-14G40G-32-CD-2 is a 10 Bit programmable attenuator with step resolution as low as 0.04dB which provides over 32dB of attenuation over the frequency range of 14.0 to 40.0GHz. This model is offered in a slim line housing measuring 2.0" x 1.8" x 0.5" with 2.92mm female connectors... Read more »

MMIC switches from Planar Monolithic Industries (PMI) include its newest reflective solid state switch, Model No. P2T-1G1R1G-25-R-TFF-40W, a single pole, two-throw, hermetically sealed, reflective switch designed to operate over the 1.0 to 1.1GHz frequency range. This model is designed to... Read more »

PMI Model No. PL-MCU-ENET-TTL-MAH is an Ethernet Microcontroller Test Box which allows for an Ethernet command to be sent up to 18 parallel TTL output bits. This controller can be used with any PMI products that require parallel digital commands, such as switches, attenuators, phase shifters... Read more »

PMI Model No. DTA-50M2D5G-CD-SFF-1 is a non-reflective, 10-Bit programmable 60dB PIN diode attenuator with a step resolution as low as 0.06dB over the frequency range of 50MHz to 2.5GHz. Read more »

PMI Model No. DGM-18G40G-292FF-DS is a Quad Phase & Amplitude Matched mmW (Milimeter Wave) Diplexer-Gain module designed to operate over the 18.0 to 40GHz frequency range with a switched output and an integrated power divider feeding the four antenna inputs via a 20dB coupler for ease of system... Read more »

PMI Model No. TD-1G12G-RL-CD-SFF is a high speed threshold detector designed to operate over the 1.0 to 12.0GHz frequency range. It has an adjustable threshold level of -30 to -10dBm and a VSWR of 3.0:1 max. This unit comes in a very small size with field removable SMA connectors on the input... Read more »

PMI Model No. PS-500M2G-8B-SFF is a stare-of-the-art, 8-Bit Digitally Controlled Phase Shifter that operates over the 500MHz to 2.0GHz frequency range. This model has a typical insertion loss of 10dB and offers 360 degrees of phase shift via 8-Bit TTL control. The phase shift error is less than... Read more »

PMI Model No. PS-360-DC-3 OPTION 618-15D is an 8-bit, digitally controlled phase shifter operating from the 6.0 to 18.0GHz. frequency range. This unit has a typical insertion loss of 10dB and a VWSR of 2.0:1 max. It is supplied with removable SMA(F) connectors in a housing measuring 1.6" x 1.75"... Read more »

PMI Model No SDLVA-0R61R1-65-CD-SFF-2 is a Successive Detection Logarithmic Video Amplifier (SDLVA) designed to operate over the 600MHz to 1.1GHz frequency range. This model offers a limited RF output of 0 to +5dBm with an input of -60dBm. This model is designed for ultra high speed... Read more »